[Elecraft] PC Command (Requested Output Level; GET / SET

[Nr4c]

.1?

Sent from my iPhone
...nr4c. bill


> On Nov 2, 2016, at 10:28 PM, Gerard Elijzen <vk2jng at icloud.com> wrote:
> 
> Hi all,
> 
> Using the Kx3 utility Command tester Revision 1.16.6.25 on my MacBook Pro I noticed the following:
> 
> Issued command PC001; results in 1W
> Issued command PC005; results in 5W
> Issued command PC010; results in 10W
> Issued command PC015; results in 15W
> Issued command PC011; ALSO results in 15W. Could this be a bug perhaps?
> 
> Also, how does one issue a command to set the power level to 100mW or 500mW.
> 
> The current KX3 Programmers Manual under the PC command states that the range is from 000 to 012 and 015 but this is not the case. Also the power levels in this section are incorrect for the given bands. They should be reversed: 80-20m = 15W and 160/ 15-6m =12W.
> 
> 
> My main question is: Using the PC command, how do I set the power level to 100mW?
> 
> Thanks,
> 
> Gerard VK2JNG
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com