[Elecraft] Using MARS M110A with K3 + Microkeyer?

[Joe Subich, W4TV]

Have you configured the K3 for DATA A, MENU:MIC SEL=LINE IN and set
up audio levels in microKEYER and your sound card as documented in
"Setting Audio Levels" in the MK Users Manual?

I have no experience with M110A but MK and the K3 should operate the
same way for any audio based data mode.   I know the audio set-up
instructions work just fine for AFSK, PSK31/63/125, JT65/JT9, MFSK,
DominoEX, Contestia, Olivia, etc.

73,

    ... Joe, W4TV


On 5/31/2016 3:50 PM, Nathern Priddy via Elecraft wrote:
> Has anyone been able to get the MARS soundcard mode M110A working with their K3 and an original microKeyer?  I tried to get the program working using DATA A, but I get almost no output power.  With the K3 set to 50 watts, I get maybe 5 watts output as monitored with a Bird wattmeter.
>
> M110A is a wideband mode that is not allowed on the ham bands, but is widely used within MARS for digital traffic.
>
> M110A works great with my old TS-2000 and a homebrew, passive soundcard interface.
>
> Barry Priddy - K5VIP
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>