[Elecraft] K3 and Microham keyer II

[Ross]

Thanks for the reply Joe,, I didn't explain very well.
I am trying to work with Airlink express,  I have com6 set on PTT2 on the 
router, (com6 shows on the router as open). PTT1 is none (no com port)
And com6 for RTS on Airlink setup.
Going to transmit a red triangle comes up on com6, but only PTT1  LED comes 
on.
Ideas please.
Thanks
Ross
ps: at least the incoming audio is working ok

-----Original Message----- 
From: Joe Subich, W4TV
Sent: Tuesday, May 31, 2016 12:19 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 and Microham keyer II


> Using Airlink Express (or any other digital program) I can get the
> PTT LED on the Microham to come on but it doesnt bring the k3 into
> tx.

*Which PTT LED?*  There are two PTT LEDs on microKEYER II (PTT1 which
is the mic PTT and PTT2 which is the ACC jack PTT) and one on the K3.

As documented in the microKEYER II Users Manual and the configuration
examples for several popular software packages, you should configure
your digital software to generate PTT by raising the RTS line on a
virtual serial port.  In addition, Router/MK II should generally be
configured to assert PTT2 when transmitting digital modes.

73,

    ... Joe, W4TV

On 5/30/2016 3:25 AM, Ross wrote:
>
> Advice please, I have the Microham working on receive, but I cannot get 
> the transmission side going for digital modes.
> Using Airlink Express (or any other digital program) I can get the PTT LED 
> on the Microham to come on
> but it doesnt bring the k3 into tx.
> I have plugged the microham into the ACC socket, to try to get the K3 to 
> transmit, but that doesn’t work.
> I have used the setup given in the Microham manual, so far no luck.
> Ideas please as to what I am missing.
> Thanks
> Roass
> ZL1WN
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rbiggar at ihug.co.nz