[Elecraft] Fwd: Re: K3 and Signallink

[Kevin Stover]

-------- Forwarded Message --------
Subject: 	Re: [Elecraft] K3 and Signallink
Date: 	Sun, 29 May 2016 16:19:26 -0500
From: 	Kevin Stover <kevin.stover at mediacombb.net>
To: 	elecraft at mailman.qth.net



Did you check the line in and line out levels?

On 5/29/2016 3:45 PM, Ross wrote:
> I have just checked my K3 again after a couple of months not using it, and I have a problem with the Signallink.
> Yes I know all the comments about it, but I want to get it going before I try to instal the Microham keyer.
> On transmit the Signallink is working perfectly, it produces the output and keys the k3, but I cannot get any audio, the line in and lineout plugs are in the correct positions on the k3.
> So can someone please guide me as to what could be wrong, would it be the settings on the k3 or something else.
> (I have checked 2 digital programs with the same result, transmit is ok, but no audio coming through.)
>
> Thanks
> Ross
> ZL1WN
> ______________________________________________________________
> Elecraft mailing list
> Home:http://mailman.qth.net/mailman/listinfo/elecraft
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:Elecraft at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html
> Message delivered tokevin.stover at mediacombb.net
>


-- 
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus