[Elecraft] Need information

[Mike Dodd]

On 5/26/2016 3:14 PM, Richard W Hemingway wrote:
>I have a K3S
> which I think is great, however, I  have a  problem.  I mostly
> operate PSK.  I do  this through fldigi  in a computer (Mac) and with
> SignaLink USB.  However I have been unable to TX to the K3S  with
> Fldigi (also with Coco Modem).

Why are you using SignaLink, and not the built-in USB sound card in the 
K3s? I sold the SignaLink I used with a KX3 when I bought the K3s a 
couple of months ago.

I use FLDigi with the K3s sound card, and it works perfectly. The only 
thing I need to do is remember to hold the VOX button to turn on VOX, so 
the xmit audio keys the transmitter. My MENU: VOX GN is set to 10.

Tap MODE to select DATA. For PSK-31 (vs. RTTY), be sure to hold DATA MD 
and select DATA-A, not AFSK-A, with the VFO B knob.

Adjust the MIC knob for LINE 5 input level.

I don't recall setting any audio level for the USB sound card, but that 
can be set in FLDigi (I think).

Hope this helps.

-- 
73, Mike N4CF
Louisa County, VA USA
Elecraft K3s/100
Carolina Windom up 45'
http://n4cf.mdodd.com