[Elecraft] Headset

[John]

I use the KOSS SB45, it has the same electret element as in the Yamaha. In fact
it is almost identical to the Yamaha, but uses silver ear cups. I understand some
of the components used in the Yamaha are made by Koss…perhaps the CM500
is made in the Koss factory, but labeled Yamaha ?
Terrific RX and TX audio with my KX3 and Flex rigs using my Koss SB45 - make sure
you get the SB45 (electret) and not the SB40 (dynamic)

73
John





On 26 May 2016, at 4:14 PM, Mike Harris <mike.harris at horizon.co.fk> wrote:

Hi,

If I remember correctly the Koss SB45 headset has been offered as a suitable substitute for the K3 weapon of choice the Yamaha CM500. Any experience out there?

My much used CM500 are starting to shed the leatherette covering and the foam inside the cavities is wearing away. CM500 can be rather difficult to source.

Regards,

Mike VP8NO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jkramer at iafrica.com