[Elecraft] Microkeyer II vs K3s

[Joe Subich, W4TV]

On 5/25/2016 2:08 PM, john at kk9a.com wrote:
 >
 > Check the internal jumpers.

The only internal jumpers in microKEYER II control bias to the front
and back mic jacks.

> The fourth unit worked fine when I previously used it with a Yaesu
> but I cannot get it to work with my K3S for some reason.

Check your cables - particularly the RJ45 connector on the *Elecraft*
supplied E980287 RJ45 to DE9 (9 pin female) cable.  I have seen several
reports of intermittent connection in the RJ45 plug/jack.

73,

    ... Joe, W4TV


On 5/25/2016 2:08 PM, john at kk9a.com wrote:
>
>
> Check the internal jumpers. I assume that you assigned a com port and
> selected K3 38400 in the router. I have four DigiKeyer IIs and I can
> only get three working with the K3S . The fourth unit worked fine when I
> previously used it with a Yaesu but I cannot get it to work with my K3S
> for some reason.
>
> John KK9A
>
> On 2016-05-25 13:49, Francisco "Siso" Hennessey HK3W wrote:
>
>> Yes John, 38400bps
>>
>> 2016-05-25 12:45 GMT-05:00 john at kk9a.com <john at kk9a.com>:
>>
>>> Is the K3S RS232 set to 38400 b?
>>>
>>> From HK3W
>>> Wed May 25 07:41:45 EDT 2016
>>>
>>> The Microham program does not recognize de K3
>>>
>>> This is how I have it connected:
>>>
>>> 1. The Y cable is conected to the K3S ACC port.
>>> 2. One of the Y legs goes to the MicroHam's ACC.
>>> 3. The other leg of the Y cable goes to the XCVR port on the KAT500.
>>> 4. The E8504643 cable goes from the KAT500 (AMP) to the KPA500 AUX1 port.
>>> 5. The Microham RS232 cable is connected to the PC port on the P3.
>>> 6. The XCVR port on the P3 is connected to the RS232/P3 port on the K3.
>>>
>>> I have a leftover Y cable as Elecraft sent me 2.
>>> I use 38400 bps in baud rate
>>> I have K3S + P3 +KAT500+KPA500
>>> Regards
>>> Siso HK3W
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft [1]
>>> Help: http://mailman.qth.net/mmfaq.htm [2]
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net [3]
>>> Please help support this email list: http://www.qsl.net/donate.html [4]
>>> Message delivered to hk3w.inf at gmail.com
>>
>> --
>>
>> ______________________________________________________________________
>>
>> FRANCISCO "SISO" HENNESSEY - H K 3 W ---
>>
>> ARRL DXCC CARD CHECKER
>>
>> DXCC HR - DXCC CW - DXCC RTTY -DXCC SSB - 8BDXCC - | Skype: siso-hk3w | TWITTER: HTTP://TWITTER.COM/HK3W [5] |
>>
>> MEMBER OF: ARRL (LM) - LOTW -
>
>
>
> Links:
> ------
> [1] http://mailman.qth.net/mailman/listinfo/elecraft
> [2] http://mailman.qth.net/mmfaq.htm
> [3] http://www.qsl.net
> [4] http://www.qsl.net/donate.html
> [5] http://twitter.com/HK3W
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>