[Elecraft] Microkeyer II vs K3s

[john at kk9a.com]

Is the K3S RS232 set to 38400 b?

>From HK3W
Wed May 25 07:41:45 EDT 2016

The Microham program does not recognize de K3

This is how I have it connected:

1. The Y cable is conected to the K3S ACC port.
2. One of the Y legs goes to the MicroHam's ACC.
3. The other leg of the Y cable goes to the XCVR port on the KAT500.
4. The E8504643 cable goes from the KAT500 (AMP) to the KPA500 AUX1 port.
5. The Microham RS232 cable is connected to the PC port on the P3.
6. The XCVR port on the P3 is connected to the RS232/P3 port on the K3.

I have a leftover Y cable as Elecraft sent me 2.
I use 38400 bps in baud rate
I have K3S + P3 +KAT500+KPA500
Regards
Siso HK3W