[Elecraft] KX2 Power Connector

[Wayne Burdick]

Both KX2 and KX3 are supplied with a power cable that has a right-angle plug compatible with this jack.

If you need additional making plugs for battery packs, etc., we suggest digikey.com p/n CP3-1000-ND, the same plug we use on our KXBT2.

Wayne
N6KR



On May 24, 2016, at 11:03 AM, Nr4c <nr4c at widomaker.com> wrote:

> The end-view on page 5 of the manual is called out as the standard Elecraft 5.5 X2.1 mm coaxial power connector with positive center pin. 
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On May 24, 2016, at 12:07 PM, Bruce Nourish <w0mbt at w0mbt.net> wrote:
>> 
>> Hi folks,
>> 
>>> From the pictures it looks like the KX2 power connector is different from
>> that of the KX1/3, but in Eric's podcast interview he seemed to suggest it
>> was the same. Could someone who knows for sure clarify?
>> 
>> Bruce
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nr4c at widomaker.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com