[Elecraft] Begali Adventure on the KX2

[Phil Wheeler]

Excellent news, Ed. Thanks for posting!

73, Phil W7OX

On 5/20/16 9:10 PM, Ed Muns wrote:
> I have been using a Begali Adventurer Mono on my KX2 SN 20 for several weeks
> now with no problem.  The screws look short enough and are not anywhere
> close to the PCB.
>
> This morning (Friday) before the Dayton vendor displays opened, I had Wayne
> look at my paddle and he verified that the screws were short enough.
>
> Ed W0YK

> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Phil
> Wheeler
> Sent: Thursday, May 19, 2016 5:30 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Announcing the KX2 80-10 m, SSB/CW/Data transceiver
>   
> Mike,
>   
>   From the KX2 FAQ
> http://www.elecraft.com/manual/KX2%20FAQ%20v-1-1a.pdf
>   
>     "Q:
> Can I use a KXPD3 with the KX2?
> A:
> Yes; however, you may need to update the KXPD3. If your KXPD3 has one thumb
> screw that's longer than the other, order part no. E700425 to replace the
> original left-hand thumb screw on the KXPD3. Use of the original longer
> thumb screw would damage the KX2."
>   
> So it appears the Adventure mount will fit, but that we may need to shorten
> the screws a bit.  Not sure what "a bit" is!
>   
> 73, Phil W7OX
>   
> On 5/19/16 3:16 PM, Mike via Elecraft wrote:
>
> Will the Begali "Adventure" paddles fit the KX2 as well as the KX3?
>    
> Mike KD8RQE
>
>   
>
>