[Elecraft] KAT500 with KX3

[tomb18]

HiWin4K3Suite supports this without hardware. 73 Tom


Sent from my Samsung Galaxy smartphone.-------- Original message --------From: Jim Brown <jim at audiosystemsgroup.com> Date: 2016-05-20  3:56 PM  (GMT-05:00) To: elecraft at mailman.qth.net Subject: Re: [Elecraft] KAT500 with KX3 
This looks like a nice pieces of software, but it is only needed if 
you're feeding the KAT500 less than 10-20W (that is, KX3 barefoot). The 
KAT500 senses operating frequency from RF, but it needs about that level 
to do so.

Another good reason for using this band decoder is to automatically 
switch antennas or bandpass filters.

73, Jim K9YC

On Fri,5/20/2016 11:28 AM, ke9uw wrote:
> You need the Paula Keezer KX3 band decoder. Makes the KX3 look like a K3 for
> the purpose.
>
> http://www.nx1p.net/what-is-a-kx3-band-decoder/

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca