[Elecraft] RFI and Direct tv or Dish network
Warren Merkel
hullspeed21 at gmail.com
Wed May 18 08:23:30 EDT 2016
I have a DirecTV system and haven't had as good luck with RFI as the
others here. My dish is about 40 feet directly below and near the end
of an OCF 80m Windom. It worked out that was the only realistic
position that afforded full Sat views through the trees.
Usually nothing happens at 100w HF output, but when I run the power up
to 500w (depending on band), two of my DVRs either "turn off" (standby
really) or start randomly recording whatever channel is being tuned at
the time. I've got the dish grounded and the RG6 feed is passed
multiple passes through large #31 ferrites, with no overall improvement
in RFI.
I would recommend much more separation of antennas and feedline than I
have, if possible.
Warren, KD4Z
On 5/17/2016 10:08 PM, w9hak <w9hak at twc.com> wrote:
I am contemplating dropping TWC and going to a satellite system. Any
advise on rfi would be appreciated.
Smith Bradford
W9HAK
More information about the Elecraft
mailing list