[Elecraft] Elecraft Digest, Vol 145, Issue 16

[Scott Townley]

The easiest way I've found to reroute signal lines in these sorts of cables is to build a little "adapter" of back-to-back DB shells (9, 15, 25), one male and one female, separated by a  pair of 1" 4-40 hex standoffs.  You then wire between the shells whatever pinout changes you need.  Relatively straightforward and doesn't wreck the original cable.  That's how I did it on my setup (identical to yours).
> 
> 
> Message: 21
> Date: Sun, 15 May 2016 11:43:05 -0400
> From: Art <kz5d at aol.com>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] KPA500 with K3/0 and remote rig
> Message-ID: <154b515cd69-3fd8-1c324 at webprd-a54.mail.aol.com>
> Content-Type: text/plain; charset=utf-8
> 
> Hi all,
> 
> 
> Interested in using the KPA500 via remote. K3/0 manual states that a simple mod to the KPAK3AUX cable is needed. 
> 
> 
> However, this cable from factory has a molded shell on both ends. Anyone figured out how to access it to make the wiring connection needed?
> 
> 
> Thanks.
> 
> 
> Art KZ5D
> 
> 
> ------------------------------
> 
>