[Elecraft] KPad and P3

Dave W8FGU dave at w8fgu.com
Thu May 12 16:24:46 EDT 2016


  I asked Wayne about this a few weeks ago when they announced the K-Pod. 
He said that it would be a firmware tweak. My guess is that he is being 
modest with that estimate, but this sounds high on the priority list of 
features.

My guess is it may not be there in the initial release (he may prove me 
wrong though), but would be out soon thereafter.

73,
Dave W8FGU



On 5/12/2016 4:15:40 PM, "Randy Farmer" <w8fn at tx.rr.com> wrote:

>Myself! Having the ability to click to tune to a signal on the P3 
>without messing with the P3 front panel knob would be an EXCELLENT aid 
>for both DXing (especially if you could do it with VFO B) and S&P 
>contesting.
>
>73...
>Randy, W8FN
>
>On 5/12/2016 2:36 PM, Bob Novas wrote:
>>I'm really interested in the KPad, but specifically for use with the 
>>P3. The
>>K3/K3S already has a nice knob!  I like to use the P3's knob to tune 
>>to a
>>signal and then push the P3 knob in to set the K3S receiver to that
>>frequency.  Most of the time I can very accurately hit as SSB signal, 
>>if I
>>turn the P3 knob to the correct side of an SSB signal and simply 
>>assume that
>>the carrier is at xxx0.0 kHz. But the P3 knob is small and that makes 
>>this
>>hard to do.  I think it would be great if you could do this with the 
>>KPad
>>knob, and one of the KPad buttons.
>>
>>
>>But, I called Elecraft and spoke to tech support and they said the 
>>KPad
>>wasn't being programmed to work with the P3, but that this reflector 
>>was a
>>great place to post feature requests. Do any others want to chime in 
>>and
>>request this feature?  Thanks, Bob   - W3DK
>>
>>
>>______________________________________________________________
>>Elecraft mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Elecraft at mailman.qth.net
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html
>>Message delivered to w8fn at tx.rr.com
>>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to dave at w8fgu.com



More information about the Elecraft mailing list