[Elecraft] KPad and P3

[Mike Murray]

Count me in - great idea!

Mike - W0AG

On Thu, May 12, 2016 at 2:36 PM, Bob Novas <bob.novas at verizon.net> wrote:

> I'm really interested in the KPad, but specifically for use with the P3.
> The
> K3/K3S already has a nice knob!  I like to use the P3's knob to tune to a
> signal and then push the P3 knob in to set the K3S receiver to that
> frequency.  Most of the time I can very accurately hit as SSB signal, if I
> turn the P3 knob to the correct side of an SSB signal and simply assume
> that
> the carrier is at xxx0.0 kHz. But the P3 knob is small and that makes this
> hard to do.  I think it would be great if you could do this with the KPad
> knob, and one of the KPad buttons.
>
>
>
> But, I called Elecraft and spoke to tech support and they said the KPad
> wasn't being programmed to work with the P3, but that this reflector was a
> great place to post feature requests. Do any others want to chime in and
> request this feature?  Thanks, Bob   - W3DK
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w0agmike at gmail.com
>