[Elecraft] K3,P3,SPE 1.3kw amp and MicroHAM interface III

Tue May 10 08:15:01 EDT 2016

Use the parallel interface ("Yaesu") instead of serial.  That will
avoid the conflict between serial data at 38,400 bps for K3/P3 and
computer/logger and the fixed 9600 bps of the Expert.

Use an Elecraft "all 15" DB15HD Y connector (E980190) and the
connections in the bottom half of the attached document (sent
directly) from the original SPE Distributor in the USA.

73,

    ... Joe, W4TV

On 5/10/2016 12:25 AM, Jerry Muller via Elecraft wrote:
> Ok all you great guys.
>      I have a K3 which is hooked to my P3 thru the K3  RS-232 port which is
> normal and then from the P-3 to the CPU for logging.  I now have a MicroHAM
> Interface III which also wants that RS-232 port.  Will a RS 232 Y cable
> work? That is the first question.  The second one is  that the SPE 1.3KW wants
> to run off of the RS-232 from the P-3 but so does my  logging Program. Will
> a RS-232 Y cable fix this issue. I know that the speed of  the K-3 port is
> 48,000 baud.  How will this effect the 9600 baud rate of  the MicroHAM
> interface and  the 48,000 baud rate input to the CPU for  logging and the SPE
> 1.3KW amp?
>
> Gerald Muller K9GEM
> GMuller885 at aol.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>