[Elecraft] K3,P3,SPE 1.3kw amp and MicroHAM interface III

[Matt Zilmer]

Try LPBridge, at www.telepostinc.com.  It's a more-or-less virtual 
Y-cable.  Read the docs first, though.  You will probably be stuck with 
9600 bps if you choose this path.

73,

matt W6NIA

==

On 5/9/2016 9:25 PM, Jerry Muller via Elecraft wrote:
> Ok all you great guys.
>       I have a K3 which is hooked to my P3 thru the K3  RS-232 port which is
> normal and then from the P-3 to the CPU for logging.  I now have a MicroHAM
> Interface III which also wants that RS-232 port.  Will a RS 232 Y cable
> work? That is the first question.  The second one is  that the SPE 1.3KW wants
> to run off of the RS-232 from the P-3 but so does my  logging Program. Will
> a RS-232 Y cable fix this issue. I know that the speed of  the K-3 port is
> 48,000 baud.  How will this effect the 9600 baud rate of  the MicroHAM
> interface and  the 48,000 baud rate input to the CPU for  logging and the SPE
> 1.3KW amp?
>   
> Gerald Muller K9GEM
> GMuller885 at aol.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mzilmer at roadrunner.com

-- 
Always store beer in a dark place.  - R. Heinlein