[Elecraft] KXPD1 as a sideswiper?

[Don Wilhelm]

John,

Certainly, but it is a permanent change (until changed back) and 
requires soldering.
Leave the wire to the dot side board (the one connected to the tip of 
the plug - use your ohmmeter) connected, but remove the wire to the dash 
side (goes to the ring).
Then wire the dot side and dash side boards together.

Set the INP menu to HND and swipe away.

73,
Don W3FPR

On 5/9/2016 2:53 PM, John Flynn wrote:
> Good Day Everyone,
>
> Is it possible to re-jigger the KXPD1 as a sideswiper (not a straight key)?
>
>