[Elecraft] KIO3B woes

[Steve Ward]

That was it! ID10T error strikes again

On Friday, May 6, 2016, Ed Muns <ed at w0yk.com> wrote:

> Make sure you have set 'USB' in the K3 CONFIG menu RS232 item.
>
> Ed W0YK
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net <javascript:;>]
> On Behalf Of Steve
> Ward
> Sent: 06 May, 2016 18:34
> To: elecraft at mailman.qth.net <javascript:;>
> Subject: [Elecraft] KIO3B woes
>
> Hi all, so I just got back in town last night, and I wanted to get my
> new KIO3B installed in s/n 1544 so I could give it a run during 7QP.
> Assembly went smoothly enough and the "Y" cable to the P3 seems to be
> doing its thing just fine.
>
> But my Windows 10 computer isn't talking to the K3 or the P3 anymore.
> Device manager sees both the sound card and the serial port (assigned to
> COM5) but neither the K3 utility or the P3 utility (both latest
> versions) can talk with their respective equipment. They just cycle
> through all the baud rates trying to make a connection (I checked and
> both K3 and P3 are set to 38400).
>
> What have I missed?  I checked all the firmware revisions before
> starting and everything looks just fine.  I double checked the position
> of the slide switch on the I/O board before closing the radio up.  Any
> ideas?  I would hate to have to tear it all apart again tonight just to
> get on the air for the contest tomorrow, but it's starting to look like
> that's my answer.  Please copy me on any replies because I get the
> digest version of the reflector and it'll be a while before another one
> comes through.
>
> Thanks everyone!
>
> 73,
> Steve
> AD7OG
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net <javascript:;>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ed at w0yk.com <javascript:;>
>
>