[Elecraft] Will the USB SERIAL CABLE V 1.1 supplied by Elecraft work with Windows 10?

[Guy Olinger K2AV]

If it doesn't work, disconnect the adapter from the PC. Reboot the PC.
Reattach the adapter. If it still doesn't work, disconnect the adapter
again and go to the device manager:

On the PC desktop, click on the window symbol lower left corner, then click
settings. In the "find a setting" entry field, upper right in settings
window, type "device manager" without the quotes. (Clicking on the
"Devices" choice takes you to a different place.)  In search results
window, click "Device Manager".

In Device manager, click on "Ports", double click on your USB to serial
listing among all the ports.

Click on the "driver" tab.

The current prolific driver, supplied by Windows over the internet and
blessed by Windows 10, according to the driver panel, is 3.6.81.357, dated
9/4/2015. This driver works well here, and is always running my AIM4170
analyzer when it is in the shack.

If you have a "strange" or older version, then click on the update driver
button, and click on the "search automatically" choice.

If it tells you that you are current, then in device manager click on the
uninstall button to remove it. when that is done, plug in the adapter cord,
and when it asks where to get the driver, chose the internet. It will do a
new install of the current "blessed" driver.

There are other gotchas, like if the actual cord that you have has a fake
chip in it, and other irritating circumstances.

Hope that helps.

73, Guy K2AV



On Sun, May 1, 2016 at 3:13 PM, Jack Colson <jcolson7 at tampabay.rr.com>
wrote:

> This is a 2007 CD. It works with Win 7.
> 73,
> Jack, W3TMZ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av.guy at gmail.com
>