[Elecraft] [K3] Tokyo Hy-Power HL-1.2KFX amp interfacing (to ALC or not to ALC?)

[Igor Sokolov]

IMHO CW can be seen as 100% AM modulation which will have 2 sidebands. 
Therefore the bandwidth will be dependant on speed or baud rate as well as 
shape of the wave form.

73, Igor UA9CDC

----- Original Message ----- 
From: "Jim Brown" <jim at audiosystemsgroup.com>
To: <elecraft at mailman.qth.net>
Sent: Wednesday, March 30, 2016 9:21 AM
Subject: Re: [Elecraft] [K3] Tokyo Hy-Power HL-1.2KFX amp interfacing (to 
ALC or not to ALC?)


> Unfortunately the guys who wrote the rules failed to understand the 
> physics and the math. They were WRONG, and it is a misconception under 
> which we have been laboring for as long as I've been a ham. It was Henry 
> Ott who woke me up to this when I took his 3-day class on EMC around 
> 2003-4. Henry is a VERY smart guy, one of many who came out of Bell Labs.
>
> 73, Jim K9YC
>
> On Tue,3/29/2016 1:28 PM, Joe Subich, W4TV wrote:
>> >> On 3/29/2016 10:38 AM, Jim Brown wrote:
>>>>> WRONG! CW speed has NOTHING to do with bandwidth, which is
>>>>> determined by RISE and FALL times of the keying waveform and
>>>>> distortion in the RF stages.
>>
>> The standard word "paris" has 48 elements.  That makes the baud rate
>> for CW (48/60) x WPM or 0.80 x WPM.
>>
>> ITU defines the "Necessary Bandwidth" for CW as 3 or 5 times the speed
>> in bits per second (baud rate) where 3 x is for "non fading circuits"
>> (where the waveform does not need to be so "sharp") and 5 x for "fading
>> circuits."    See:
>>     http://http://life.itu.ch/radioclub/rr/ap01.htm part B.
>> The same table is found in Title 97, Part 2 of the Code of Federal
>> Regulations (FCC Rules) as §2.202(g)
>>
>> The constant 'K' sets the minimum bandwidth needed/occupied for the two
>> recognized cases.  Occupied bandwidth in excess of K=5 (or 400 Hz for
>> 100 WPM) would be unacceptable due to improper keying waveforms or
>> distortion in the RF stages.
>>
>> 73,
>>
>>   ... Joe, W4TV
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ua9cdc at gmail.com