[Elecraft] latest K2 serial #?

Bill W4ZV btippett at alum.mit.edu
Wed Mar 23 17:48:51 EDT 2016


Don Wilhelm-4 wrote
> Yes, those two mods are old, and apply only to the A level boards (below 
> SN 3000).
> There have been improvements in the K2 sidetone incorporated into the B 
> level boards, and are also included with the A to B mod kit.
> The changes added a 47k resistor in series with C24 (R11 for the B level 
> boards) and a shielded 82mH inductor across pins 7 and 10 of RP5.
> The sidetone is still not a pure sine wave, but it is close if your 
> sidetone pitch is between 500 and 700 Hz.
> 
> Those old mods would be applicable to unmodified A level boards but 
> re-design of the circuits would be required for the B level boards and A 
> level boards already modified with the A to B upgrade kit.

Don I beg to differ.  From LA3ZA's K2 mod site:

########################################
Sidetone mod 
Updated Nov 2006
	
Even more sinusoidal tone than the mod in serial #3000+ gives	

Important to have an inductor with correct series resistance (KT5X)	

Simple, one more capacitor
		
TF3MA
############################################

I installed this mod in my S/N 4119 and it made a huge difference in
sidetone quality.  The original design had so much harmonic content that it
was difficult to zero beat stations by ear.

73,  Bill  W4ZV



--
View this message in context: http://elecraft.365791.n2.nabble.com/latest-K2-serial-tp7615395p7615492.html
Sent from the Elecraft mailing list archive at Nabble.com.


More information about the Elecraft mailing list