[Elecraft] Change in P3 Offset macro...

[Dave Cole]

Hi,
For those that are using the P3 offset macro available at:

http://nk7z.net/adding-an-external-keypad-to-the-k3/

or

http://nk7z.net/wp-content/uploads/2016/02/CP48-Master-Spreadsheet.xls

if you download the spread sheet directly,  I have made a small
modification to reduce the size of the transmit marker on the P3
display window.  The new macro is:

BW0001;SWT13;SWT13;FT1;UPB7;RT0;XT0;#SPN000060;#RCF+002500;BW0280;

Basically, the macro sets bandwidth to as small as possible, then
transfers that into B, initiates the split +5, and then resets the
bandwidth to 2.8 KHz.  This results in a nice narrow red line, that you
can move around, while listening to your DX station.  It no longer
fills the screen with whatever bandwidth you had set prior to calling
this macro.  

It will work either via the Genovation, or directly in the P3 if you
hand type it in, and assign it to a button...
 
-- 
73's, and thanks,
Dave (NK7Z)

For software/hardware reviews see:
http://www.nk7z.net

For MixW support see:
https://groups.yahoo.com/neo/groups/mixw/info

For SSTV help see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info