[Elecraft] Contest Settings
Ed Muns
ed at w0yk.com
Mon Mar 21 04:34:31 EDT 2016
Wayne, is hardware AGC still "on" when (software) AGC is set to "off"?
73,
Ed W0YK
On Mar 21, 2016 00:23, Wayne Burdick <n6kr at elecraft.com> wrote:
>
> If you run with AGC off, you'll probably want to use CONFIG:AF LIM to establish an upper volume limit. See AF LIM in the menu listings.
>
> 73,
> Wayne
> N6KR
>
>
> On Mar 20, 2016, at 4:11 PM, Dave Cole <dave at nk7z.net> wrote:
>
> > Be very careful with the AGC off... The K3 has enough dynamic range to
> > blow your ears up pretty well.. I have a neighbor that runs a KW, and
> > if he comes up on my frequency, while I am listening for weak DX, it
> > hurts...
> > --
> > 73's, and thanks,
> > Dave (NK7Z)
> >
> > For software/hardware reviews see:
> > http://www.nk7z.net
> >
> > For MixW support see:
> > https://groups.yahoo.com/neo/groups/mixw/info
> >
> > For SSTV help see:
> > http://groups.yahoo.com/neo/groups/MM-SSTV/info
> >
> >
> > On Sun, 2016-03-20 at 12:51 -0700, Jeff Kinzli wrote:
> >> Tim,
> >>
> >> You might also consider "riding the RF gain" route, depending on how
> >> bad the pileups are.
> >>
> >> Turn AGC off, turn up the RF gain, and modulate RF gain as needed to
> >> discern signals.
> >>
> >> Be careful though, in this mode AF gain is mostly unbounded, i.e.
> >> you'll hurt your ears and/or headphones if a signal is really loud.
> >>
> >> For me, I use that mode sometimes when signals are weak, it seems to
> >> allow for better hearing of weak signals.
> >>
> >> YMMV, 73 de N6GQ
> >>
> >> On Sun, Mar 20, 2016 at 6:07 AM, a45wg <a45wg at sy-edm.com> wrote:
> >>>
> >>> Fellow Hams,
> >>> Having not Contested for over 5 years - I just had
> >>> spent the past 24 hours participating in the Russian DX Contest
> >>> (CW), now I realise that Contests are not everyone’s cup of tea so
> >>> please no “Contests should be banned”.
> >>>
> >>> But I would be interested in how other contesters set up their rigs
> >>>
> >>> This is what I have been doing -
> >>>
> >>> 0) Narrow Filter enable (500 Hz)
> >>> 1) Very narrow Bandwidth at times even 10-20 (hz?) is
> >>> too wide.
> >>> 2) Vary where I am listening up and down a little
> >>> 3) Disable PreAmp
> >>>
> >>> What other steps can I do to make my life (and the other stations I
> >>> am working easier - I forgot how many times I sent R7?? or NR ??)
> >>>
> >>> Attentate (Just thought of this)
> >>> NR Settings ?
> >>> Notch filter ?
> >>>
> >>> Appreciate any input - if you wan to PM me - I will put together
> >>> the common suggestions.
> >>>
> >>> Many thanks,
> >>> Tim A45WG
> >>> ______________________________________________________________
> >>> Elecraft mailing list
> >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>> Help: http://mailman.qth.net/mmfaq.htm
> >>> Post: mailto:Elecraft at mailman.qth.net
> >>>
> >>> This list hosted by: http://www.qsl.net
> >>> Please help support this email list: http://www.qsl.net/donate.html
> >>> Message delivered to kinzli at kinzlicoils.com
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to dave at nk7z.net
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to n6kr at elecraft.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ed at w0yk.com
More information about the Elecraft
mailing list