[Elecraft] Macro Questions on a KX3

[Randy Diddel]

Thanks Wayne and Bill,

I knew I just needed a second set of eyes on it.  I will give it a try when I get home.//73

K5RHD

/randy


> On Mar 21, 2016, at 10:08 AM, Wayne Burdick <n6kr at elecraft.com> wrote:
> 
> Hi Randy,
> 
> You need three digits with the MP command. After the MN096, use "MP001;" to turn ESSB on or "MP000;" to turn it off.
> 
> 73,
> Wayne
> N6KR
> 
> 
> On Mar 21, 2016, at 7:57 AM, Randy Diddel <k5rhd.73 at gmail.com> wrote:
> 
>> Good day,
>> 
>> I wrote this about a week ago and nobody responded so I am asking
>> again.  Maybe Wayne or Eric can field it:
>> 
>> 
>> I am programming Macros for my KX3.  Recent financial issues have
>> relegated me back to just my trusty KX3 for all things HF.  When in
>> the shack, I usually operate low power digital modes and have my macro
>> nearly perfect.  The one parameter I cannot get right is to switch
>> ESSB so I am able to TX in the upper part of the JT area and use
>> JT9-ESSB works great for this!  As you can see below, I am trying to
>> use the MN096 and a toggle (MP00) to set the bit to on, but it does
>> not work.  I am certain it is just a syntax error.  Also, for when I
>> am doing voice and SOTA, I would like the command to do the opposite
>> and turn off ESSB.
>> 
>> Digital Macro:
>> TE-00-00-00-00+00+00+00+00;PA0;MG001;AG004;BW0400;IS
>> 1500;PC150;ML000;MD2;CP000;SWT21;MN096;MP00;*CP000;SWH09
>> 
>> SSB/Voice Macro
>> TE-16-16-10-06+04+06+08+12;*MD2;CP025;*MG020;BW0240;SWH34;ML000;AG002;IS
>> 1350;PC150;*SWH09;
>> 
>> As always, TIA,
>> 
>> 73 de K5RHD
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n6kr at elecraft.com
>