[Elecraft] KX3 Grounding & NiMH Batteries

[Jim Brown]

That's also what I do with all my gear -- stranded wire crimped and 
soldered to a spade lug on one end and soldered to a PowerPole on the 
other. Then single conductor power pole jumpers of suitable length from 
one piece of gear to another.

73, Jim K9YC

On Sun,3/20/2016 12:09 PM, James Wilson wrote:
> For grounding, I am partial to PowerPole (PP) connectors.
> I use the 30 amp ones to quickly connect and disconnect
> the radial wires for my movable vertical. You could use
> a very short wire from your KX3 ground lug to a PP. If
> you want to be "code" correct, you can get the PP connectors
> in all colors including GREEN for ground.