[Elecraft] Contest Settings
Wayne Burdick
n6kr at elecraft.com
Sun Mar 20 19:23:34 EDT 2016
If you run with AGC off, you'll probably want to use CONFIG:AF LIM to establish an upper volume limit. See AF LIM in the menu listings.
73,
Wayne
N6KR
On Mar 20, 2016, at 4:11 PM, Dave Cole <dave at nk7z.net> wrote:
> Be very careful with the AGC off... The K3 has enough dynamic range to
> blow your ears up pretty well.. I have a neighbor that runs a KW, and
> if he comes up on my frequency, while I am listening for weak DX, it
> hurts...
> --
> 73's, and thanks,
> Dave (NK7Z)
>
> For software/hardware reviews see:
> http://www.nk7z.net
>
> For MixW support see:
> https://groups.yahoo.com/neo/groups/mixw/info
>
> For SSTV help see:
> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>
>
> On Sun, 2016-03-20 at 12:51 -0700, Jeff Kinzli wrote:
>> Tim,
>>
>> You might also consider "riding the RF gain" route, depending on how
>> bad the pileups are.
>>
>> Turn AGC off, turn up the RF gain, and modulate RF gain as needed to
>> discern signals.
>>
>> Be careful though, in this mode AF gain is mostly unbounded, i.e.
>> you'll hurt your ears and/or headphones if a signal is really loud.
>>
>> For me, I use that mode sometimes when signals are weak, it seems to
>> allow for better hearing of weak signals.
>>
>> YMMV, 73 de N6GQ
>>
>> On Sun, Mar 20, 2016 at 6:07 AM, a45wg <a45wg at sy-edm.com> wrote:
>>>
>>> Fellow Hams,
>>> Having not Contested for over 5 years - I just had
>>> spent the past 24 hours participating in the Russian DX Contest
>>> (CW), now I realise that Contests are not everyone’s cup of tea so
>>> please no “Contests should be banned”.
>>>
>>> But I would be interested in how other contesters set up their rigs
>>>
>>> This is what I have been doing -
>>>
>>> 0) Narrow Filter enable (500 Hz)
>>> 1) Very narrow Bandwidth at times even 10-20 (hz?) is
>>> too wide.
>>> 2) Vary where I am listening up and down a little
>>> 3) Disable PreAmp
>>>
>>> What other steps can I do to make my life (and the other stations I
>>> am working easier - I forgot how many times I sent R7?? or NR ??)
>>>
>>> Attentate (Just thought of this)
>>> NR Settings ?
>>> Notch filter ?
>>>
>>> Appreciate any input - if you wan to PM me - I will put together
>>> the common suggestions.
>>>
>>> Many thanks,
>>> Tim A45WG
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to kinzli at kinzlicoils.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to dave at nk7z.net
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com
More information about the Elecraft
mailing list