[Elecraft] Kx3 and fldigi

[W Paul Mills]

Have you loaded KX3.xml needed for RigCat? Get it at
<https://sourceforge.net/projects/fldigi/files/xmls/elecraft/KX3.xml/download>.
Also read the notes at the top of the KX3.xml file.(Can be opened with a
text editor.)

You may also want to try to control via flrig. You will need to read the
fldigi manual on how to set this up.

Latest files for fldigi are at:
<https://sourceforge.net/projects/fldigi/files/fldigi/>

Latest files for flrig are at:
<https://sourceforge.net/projects/fldigi/files/flrig/>

Chose the appropriate file for your operating system. Manuals are
available in the same directories.

Mentor assistance is available on the following Yahoo groups:

  * linuxham  - primarily for Linux and OS X users
  * NBEMSham  - support for using the entire suite in an EMCOMM environment
                all operating systems
  * winfldigi - for users on Windows OS.

Hope something here will help get you going.



On 03/18/2016 09:43 PM, Stan wrote:
>   Anyone here tried rig control for the KX3 using fldigi and received a init:_IO error message? I've recently been dabbling in the digital modes and can't seem to find a specific answer to the issue. My web searches aren't helping much either. I've tried reconfiguring setting based on suggestions and instructions but can seem to pin point the solution. Im using windows 7 and a signalink unit. I can key tx manually but cannot get the rig controls initiate for using hamlib or rigCAT.
> If any one can point me in the right direction for answers that would be very helpful.
> 
> Thank You
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ac0hy at mills-usa.com
> 


-- 
/*************************************************
* Amateur Radio Station AC0HY                    *
* W. Paul Mills         SN807                    *
* Assistant EC Alpha-1 ARES Shawnee/Wabunsee, KS *
* President Kaw Valley Amateur Radio Club        *
*************************************************/