[Elecraft] KX3/PX3 Keyboard CW.

[Eric Swartz - WA6HHQ, Elecraft]

Make sure VOX is enabled while in CW mode on the KX3.

73,

Eric
elecraft.com
_..._



> On Mar 16, 2016, at 11:17 AM, James Griffith <wa7ndd at digis.net> wrote:
> 
> I have a Logitech K400 keyboard wireless adapter plugged into my PX3. The keyboard transmits to the PX3 screen. Tapping Control T and the CW message transmits, you can hear it on the KX3 CW monitor. The power is set to 5 watts so the rig is not in practice mode. The problem is the KX3's red LED does not show transmitting, and there is no power out, but the message does play. Looked through the menus for some type of TX keying recognized from the keyboard but found nothing. Anyone with keyboard experience. The PX3 and KX3 have the newest software upgrades.  Just hit me, I did not try the VOX. Thank you, WA7NDD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to eric.swartz at elecraft.com
>