[Elecraft] KIO3B

[Kevin Stover]

I have a Winkey. I use it.

On 3/13/2016 9:25 AM, Mike Harris wrote:
> An observation.
>
> Installed a KIO3B in K3 #345, no problems all working either RS232 or 
> USB or both together for CAT and audio.
>
> I use Logger32 and prior to installing the KIO3B my 3GHz clock PC 
> comfortably delivered software CW from within Logger over RS232 
> without the need for a Winkey unit.
## How do you know that? It may work great at any specific time but 
sooner or later the CW will get messed up.
If you don't have a Winkey USB I'd get one, One USB cable to the PC and 
a key line to the rig. It's supported by all the contesting/general 
logging software. It's also a real good standalone keyer, better than 
the one in the K3(s).

I'd be using the RS-232 port on the K3s for rig control and the USB for 
audio in/out.
The one cable solution may not be.
>
>
> Any thoughts.
>
> Regards,
>
> Mike VP8NO
>
>


-- 
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus