[Elecraft] 10 MHz external reference

[Pete Smith N4ZR]

Take a look at this GPSDO 
<http://www.force12inc.com/products/gps-locked-precision-frequency-reference-low-jitter-gps-clock-450-hz-to-800-mhz-output.html>. 
Needs 13-15 VDC and a powered GPS antenna, but it is plug and playon any 
frequency from 450 KHz to 800 MHz, with software-adjustable output level.

73, Pete N4ZR
Download the new N1MM Logger+ at
<http://N1MM.hamdocs.com>. Check
out the Reverse Beacon Network at
<http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

On 3/9/2016 12:37 PM, Gary Smith wrote:
> I ordered the K3EXREF and thought it was the oscillator itself which
> would provide the external signal source to the K3s. I thought this
> was all I was going to need but I see now that is not the case.
> Looking on the Elecraft order page, they don't sell a reference
> source.
>
> What external 10-MHz reference signal source might I find get that is
> not terribly expensive that will do the proper job and allow me to
> get this working?
>
> Thanks & 73,
>
> Gary
> KA1J
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4zr at contesting.com
>