[Elecraft] 10 MHz external reference

[Udo Langenohl - DK5YA]

Gary,

there is a huge amount of sources available, i.e.

http://world.taobao.com/item/42336500072.htm?fromSite=main&spm=a312a.7700824.w4004-11814489530.4.1iUOwV

or

http://www.ebay.ca/itm/10MHZ-OUTPUT-Square-WAVE-GPS-DISCiPLINED-CLOCK-GPSDO-with-Antenna-power-supply-/171813807811

or

http://www.force12inc.com/products/gps-locked-precision-frequency-reference-low-jitter-gps-clock-450-hz-to-800-mhz-output-custom-low-phase-noise-xtal-version.html

and many more.

73 Udo, DK5YA


Am 09.03.2016 um 18:37 schrieb Gary Smith:
> I ordered the K3EXREF and thought it was the oscillator itself which
> would provide the external signal source to the K3s. I thought this
> was all I was going to need but I see now that is not the case.
> Looking on the Elecraft order page, they don't sell a reference
> source.
>
> What external 10-MHz reference signal source might I find get that is
> not terribly expensive that will do the proper job and allow me to
> get this working?
>
> Thanks & 73,
>
> Gary
> KA1J
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dk5ya at dk5ya.de
>

-- 
******************************************
Webs by DK5YA:                           *
http://www.mmmonvhf.de/          [editor]*
http://www.vhfdx.de/             [owner] *
http://www.palekastro.de/        [owner] *
http://www.solweb.de/            [owner] *
http://www.spessartwetter.de/    [owner] *
******************************************