[Elecraft] K3/0 - How to enable left side mic?

[Joe]

Hello Jim,

My post was regarding the K3/0 and you have the Mini.  It looks like 
they are two different animals and the mike connection is different.

73, Joe, K1ike

On 3/7/2016 3:45 PM, elecraft-request at mailman.qth.net wrote:
> To All,
> I sent a support request to Elecraft regarding my issue and they replied
> with the following:
>
>
> ======== Start E-Mail Here ===========
> Hi Jim,
>
> >From what you indicated, your Bias is turned ON for the MH2. If you are
> using headsets which require Bias, this is important.
>
> You can either use VOX or connect a footswitch to the back of the Mini
> (PTT) to place the Mini in transmit. The XMIT/tune button can not be used
> for PTT.
>
> The microphone should have a mono 3.5 mm plug. That would go into the MIC
> jack on the side of the Mini.
>
> Let me know if this helps.
>
> 73,
>
>