[Elecraft] K3 HI SIG on the display

[Don Wilhelm]

Ed,

Remove all coax and other cables except power from the K3, then connect 
a dummy load.
If the HI SIG message is still present, it is likely there is an 
internal K3 problem.
If the message goes away, start connecting things one at a time to 
determine which is causing the problem.

73,
Don W3FPR

On 3/5/2016 1:27 PM, KD7PY wrote:
> Just tried to do the ( PARAMETER INITALIZATION ) per the manul...
>
> when powering on a holding shift-lo knob in I get  EE INT,  norm,   hi sig
> one message,  one after another..
>
> still locked up.   looks like I might have to send it to the boys at
> Elecraft.  hope I can do the repair myself
> if not to involved.
>
> Ed   KD7PY
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-HI-SIG-on-the-display-tp7614930p7614936.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>