[Elecraft] ERR KEY

[Joe Subich, W4TV]

ERR KEY should only appear at turn on if one of the key lines is
closed.  The only other report of ERR KEY has been when certain
software combinations poll the K3 too rapidly during transmit and
overflows the processor buffer.

Are you using N1MM Logger+ *and* NaP3 with their default polling
settings at the same time?

73,

    ... Joe, W4TV


On 3/5/2016 9:11 AM, Peter Chamalian wrote:
> When using the K3 on SSB with a condenser mike I am occasionally getting an
> ERR KEY error and the vox does not trigger.  The manual talks about
> attempting to key the PTT but I do not use it on SSB.  The K3 is connected
> to a micro Keyer II and it does trigger PTT on CW.  I do not use any voice
> connection between the K3 and my computer or other equipment.
>
>
>
> Nothing has changed with my station or setup in a long time and this is a
> new problem that has appeared in ARRL SSB.
>
>
>
> Pete, W1RM
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>