[Elecraft] K3S USB port question

[Jim Sheldon]

Thanks Lyle,
I thought that was the way it should work, but I couldn't find it in the 
books (not sure if I overlooked it or might be something that needs to 
be added).  Anyway that saves me a whole lot of shack re-wiring and I'll 
be able to run two instances of MMTTY for SPLIT copy of the 2nd RX.

Also gets the HUGE HAL ST-8000A off the desk and frees up a bunch of 
room on the monitor shelf.

73,
Jim, W0EB

------ Original Message ------
From: "Lyle Johnson" <kk7p4dsp at gmail.com>
To: elecraft at mailman.qth.net
Sent: 3/2/2016 12:36:11 PM
Subject: Re: [Elecraft] K3S USB port question

>Yes.  Set the RS232 menu item to the speed you want.  If it is not in 
>USB in that menu, then it is using the regular RS232 port.
>
>To use the USB audio for Tx, be sure no cable is plugged into the 
>analog LINE IN jack.
>
>73,
>
>Lyle KK7P
>
>>Can the K3 be controlled using RS-232 via the RJ-45 while 
>>simultaneously using the USB connection for it's sound card functions?
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to w0eb at cox.net


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus