[Elecraft] K3 boards

[Joe Subich, W4TV]

 > I do not see it as being available on the Elecraft site.

See KAT3A Internal ATU here:
   http://www.elecraft.com/elecraft_prod_list.htm#k3

> Also I wanted to install the KIO3B board with USB and the board that
 > has the 12,10 and 6 meter preamplifiers on it, which is standard on
 > the K3S. Are these boards not possible to be installed on a K3?

See "KIO3BUPKT  KIO3B Upgrade Kit for K3"
and "KXV3B RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface upgrade 
for earlier K3 radios" here:
   http://www.elecraft.com/elecraft_prod_list.htm#k3

73,

    ... Joe, W4TV


On 6/29/2016 10:35 AM, todd ruby wrote:
> I have a self assembled K3 and at the time I did not want to get the board that had the second SO-239 antenna port but now I do. I do not see it as being available on the Elecraft site. As a matter of fact there is little in the way of further K3 hardware support.
>
> Also I wanted to install the KIO3B board with USB and the board that has the 12,10 and 6 meter preamplifiers on it, which is standard on the K3S. Are these boards not possible to be installed on a K3?
>
> Thanks to all
>
> todd
> WB2ZAB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>