[Elecraft] SDR Processing from IF Output

[tomb18]

HiWin4K3Suite just starting supporting the SDRPLAY device. The device works quite well offering 1.8 Mhz bandwidth from the if out. It covers 10 khz to 2.1 ghz.73 Tom va2fsq.com


Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Jerry Moore <jermo at carolinaheli.com> Date: 2016-06-24  3:04 PM  (GMT-05:00) To: 'a45wg' <tim at sy-edm.com>, elecraft at mailman.qth.net Subject: Re: [Elecraft] SDR Processing from IF Output 
+1 add me to the conversation please.


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of a45wg
Sent: Friday, June 24, 2016 2:07 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] SDR Processing from IF Output

Fellow Elecrafters,
		I have been experimenting with using the IF out from my K3-S to feed an SDR Radio which will in turn allow me to perform some real time signals analysis (including but not only cw-skimmer). I have got the setup working using some cheap RTL-SDR’s which are not designed for HF bands (but with slightly different firmware can be make to sort of work - down to 20 Mhz they are bearable).

	Is anyone else doing this - I would appreciate some feedback (preferably positive) regarding more suitable SDR receivers  ??

	Please feel free to PM me - I shall post back the boiled down wisdom….

	73s and thanks

		Tim - A45WG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to jermo at carolinaheli.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca