[Elecraft] SDR Processing from IF Output

[Jerry Moore]

+1 add me to the conversation please.


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of a45wg
Sent: Friday, June 24, 2016 2:07 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] SDR Processing from IF Output

Fellow Elecrafters,
		I have been experimenting with using the IF out from my K3-S to feed an SDR Radio which will in turn allow me to perform some real time signals analysis (including but not only cw-skimmer). I have got the setup working using some cheap RTL-SDR’s which are not designed for HF bands (but with slightly different firmware can be make to sort of work - down to 20 Mhz they are bearable).

	Is anyone else doing this - I would appreciate some feedback (preferably positive) regarding more suitable SDR receivers  ??

	Please feel free to PM me - I shall post back the boiled down wisdom….

	73s and thanks

		Tim - A45WG
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to jermo at carolinaheli.com