[Elecraft] RFI on K3s

[Clay Autery]

On 6/20/2016 5:28 AM, Dave Cole wrote:
> Sometimes you can "get a feeling", where they are located by watching
> the timing...  Do they drift in the morning, and after sunset, if so,
> the SMPS might be outside, on in a non temperature controlled area, if
> not it might be inside...  
>
> Do they happen at set intervals?  Time to do the power off test to your
> home and see if they go away...  If you are lucky they will...
>
> If they do, bring the house up one breaker at a time, looking for the
> RFI to start...  If not, then set up S-Meter Lite, look for patterns,
> then after a week or so of recording what is happening, take out a loop
> and start looking for it...
Thank you...  I think I will TRACK when they are stable vs. drifting... 
First, I need to find a good battery and QUIET float charger for the K3/P3.

Lot of info in short reply.  S-Meter Lite...  Thanks!  Got it now.
Need to research/build the loop(s).

73,

______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389