[Elecraft] RFI on K3s

[Johnny Siu]

Is the Powerwerx SS-30DV currently sold in the elecraft order page?
73
Johnny VR2XMC

      寄件人︰ Marty Koszewski <mtkoszew at gmail.com>
 收件人︰ "elecraft at mailman.qth.net" <elecraft at mailman.qth.net> 
 傳送日期︰ 2016年06月20日 (週一) 9:17 PM
 主題︰ Re: [Elecraft] RFI on K3s
   
I had the same issue.  It was caused by my Powerwerx SS-30DV.  After trying a number of things to mitigate the noise, I ended up replacing the power supply with a Samlex SEC 1235M.  Noise gone.  Problem solved.

Marty - K1MTK


-----------------------------------------------------------------------------------------------




Message: 20
Date: Sun, 19 Jun 2016 23:55:59 -0500
From: Clay Autery <cautery at montac.com>
To: Elecraft Reflector <elecraft at mailman.qth.net>
Subject: [Elecraft] RFI on K3s
Message-ID: <d758bc65-135d-95dd-c423-88b34ea3e4cf at montac.com>
Content-Type: text/plain; charset=utf-8

I am seeing a repetitive RFI source every 34kHz from somewhere less than
20MHz thru 30MHz plus...

See attached image.  The amplitude alternates high/low every other
appearance.  The overall amplitude is higher or lower depending on the
location within the spectrum....  Almost a sine wave function with a
VERY long period.

Anyone want to hazard a guess as to what is causing it?  I disco'd every
switch-mode power supply in the shack and adjacent rooms (couldn't do
the whole house as the XYL was home).... EXCEPT my Powerwerx SS-30DV PS
running the K3s/P3.

Don't have a battery to run the radio on right now...



-- 
______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389



-
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to vr2xmc at yahoo.com.hk