[Elecraft] K3S master power?

[Cady, Fred]

MCU 4.93 / DSP 2.83, 10-16-2014


* KAT500 POWER-ON REMINDER ON K3 DISPLAY: If a powered-off KAT500 is pulling the auxBus signal low when the K3 is first turned on, "TURN ON KAT500" is displayed. Previously this condition would lock up the K3 without explanation.



________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Jim Sheldon <w0eb at cox.net>
Sent: Sunday, June 19, 2016 7:55 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3S master power?

  If there way, I never saw it -- but I just tested it.  Left the KAT500
off, powered up the K3S and no errors.  Then powered on the KAT500 and
it all worked just fine.  Guess I'll have to look back through the
"release notes" on the KAT500 firmware releases to see which one fixed
it.

Jim - W0EB
------ Original Message ------
From: "Wes Stewart" <wes_n7ws at triconet.org>
To: elecraft at mailman.qth.net
Sent: 6/19/2016 8:39:00 AM
Subject: Re: [Elecraft] K3S master power?

>Was there an announcement that this was fixed?
>
>On 6/18/2016 5:49 PM, Cady, Fred wrote:
>>Yeah, that has been fixed but it worked before it was fixed.
>>
>>Cheers,
>>
>>Fred
>>
>>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to w0eb at cox.net

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu