[Elecraft] K3S master power?

[KE8G]

Doesn't that present a problem?  I thought the KAT500 was supposed to be powered up before turning on the K3, or has that somehow been changed and I am stuck in the past?

73 de Jim - KE8G

Sent from my iPad

> On Jun 18, 2016, at 7:15 PM, Cady, Fred <fcady at montana.edu> wrote:
> 
> 
> I use a rigrunner 4010S that has 10 outlets and one that, when it detects a current draw from turning on the K3, turns on all the others.
> 
> Cheers,
> 
> Fred KE7X
> 
> 
> For all KE7X Elecraft books, see www.ke7x.com<http://www.ke7x.com>.
> 
> 
> ________________________________
> From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of lmarion <lmarion at mt.net>
> Sent: Saturday, June 18, 2016 1:26 PM
> To: Elecraft Reflector
> Subject: [Elecraft] K3S master power?
> 
> Is there a K3S setting that will power on the  P3, KAT500 and KPA500 when you power on the K3S ?
> 
> Thanks either way, Leroy AB7CE
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to fcady at montana.edu
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ke8g at cox.net