[Elecraft] Powered USB hub for multiple KUSB

[Jim Brown]

On Sat,6/18/2016 3:18 PM, Jim Kutsch, KY2D wrote:
> Do any of you have a recommendation of a good, RF quiet powered hub?

In the last few years, I've acquired a couple of different units "just 
in case," and a year or two ago, set them up and checked for RF noise. 
The better one is a 7-port unit with the SIIG nameplate rated for 3.0 
and 2.0. It runs from a 5V wall wart, and the supplied wart is rated 2A 
@5VDC. It also self-powers from a USB port, but with reduced available 
port power.

My note on the unit says "Some noise 160M." The model numbers I see on 
it are 02-1335A and JU-H70212-S1. It's 3.5-in square by 1-in high, 
silver-Al top plate on what feels like a metallic bottom pan.

Both the hub and the wall wart carry FCC and CE labels.

73, Jim K9YC