[Elecraft] KX3 S-meter segment stuck (Greg Cote)
Gregory Cote
gregory.cote at gmail.com
Sat Jun 18 07:02:04 EDT 2016
I recently noticed that I also have a stuck segment on my KX3 S-Meter.
However, mine is the S-9 segment.
73
Greg, WY1X
On Sat, Jun 18, 2016 at 5:36 AM, <elecraft-request at mailman.qth.net> wrote:
> Send Elecraft mailing list submissions to
> elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
> 1. Re: KX2 real life power (Tom Crayner)
> 2. Re: K3S "HI-RFI" warning a bit too sensitive? (Dave Cole)
> 3. Re: K3S "HI-RFI" warning a bit too sensitive? (Dale Putnam)
> 4. KX3 / KXPD3 "hanging"? (Thorpe, Jeffrey)
> 5. Re: K3S "HI-RFI" warning a bit too sensitive? (Ken G Kopp)
> 6. Re: KX3 / KXPD3 "hanging"? (David Box)
> 7. Re: K3S "HI-RFI" warning a bit too sensitive? (Joe Subich, W4TV)
> 8. Re: K3S "HI-RFI" warning a bit too sensitive? (Michael Walker)
> 9. Re: K3S "HI-RFI" warning a bit too sensitive? (Jim Brown)
> 10. Re: K3S "HI-RFI" warning a bit too sensitive? (Helmut Berka)
> 11. Let me build your K2 (Alan Price)
> 12. Re: KX3 / FLDIGI Question (James Bennett)
> 13. Re: KX3 / FLDIGI Question (Jorge Diez - CX6VM)
> 14. K3/100 for sale (thomas branton)
> 15. KX2 Shipping Status (Eric Swartz - WA6HHQ, Elecraft)
> 16. Re: KX2 Shipping Status (Peter Pauly)
> 17. Re: KX2 real life power (Wayne Burdick)
> 18. Re: KXPD3 thumb screw (Ron D'Eau Claire)
> 19. Re: KX2 Shipping Status (Walter Underwood)
> 20. K-Pod modification for K3S (Randy Farmer)
> 21. Re: KX3 / KXPD3 "hanging"? (Thorpe, Jeffrey)
> 22. P3/TX Mon Coupler Switching Idea (Mike VE3YF)
> 23. Re: P3/TX Mon Coupler Switching Idea (Alan Bloom)
> 24. KX3 S-meter segment stuck (Erik Basilier)
> 25. Re: KX3 S-meter segment stuck (Erlend Grimseid)
> 26. Re: P3/TX Mon Coupler Switching Idea (Mike VE3YF)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 17 Jun 2016 07:37:50 -0400
> From: Tom Crayner <tcrayner at gmail.com>
> To: david perry <bumbledp at gmail.com>
> Cc: elecraft <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX2 real life power
> Message-ID:
> <CAJhNfxbmD6akNKxxeWtdcrioEaYdwJh3NX1B+aSq1k1RDH0ZLA at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Sounds like the batteries are possibly suspect.
>
> A KX3 will give out 10W down to 10V according to the firmware release
> (v2.38), and although I haven't personally run my batteries down that low I
> haven't seen any behavior to indicate otherwise (in other words I'm getting
> 10W out, not 3 or 4W as you are seeing). Check and see if you are on that
> FW release.
>
> On the KX2 I am set at 5W out (not the full 10W due to duty cycle of the
> digital I use) and I am still getting the full 5W out with the battery pack
> about half depleted (if I believe the amp hours reading).
>
> Tom, W2YF
>
> On Fri, Jun 17, 2016 at 4:45 AM, david perry <bumbledp at gmail.com> wrote:
>
>> Im wondering what KX2 users are finding to be the output power when on
>> internal battery. I ask because I am using a friends KX3 at the moment and
>> whilst on external power it gives full spec, on internals the power drops
>> to 3 or 4 watts out. Is the KX2 better than this or is that all there is,
>> even on the new rig?
>>
>> David
>> G4YVM
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to tcrayner at gmail.com
>>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 17 Jun 2016 04:58:53 -0700
> From: Dave Cole <dave at nk7z.net>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3S "HI-RFI" warning a bit too sensitive?
> Message-ID: <1466164733.11264.6.camel at nk7z.net>
> Content-Type: text/plain; charset="UTF-8"
>
> On Fri, 2016-06-17 at 06:30 -0500, Chris L wrote:
>> A baby monitor. Yep, not one block from my house lives a couple with a
>> cheap 49MHz baby monitor blasting away on 49.850MHz all hours of the
>> day and night. A short "fox hunt" with a service monitor confirmed
>> this. ?There is 100KHz worth of splatter coming from this thing and my
>> old Icom 706 shows it as S9 with the attenuator on (and S9 +60
>> without). I spoke with someone at the house and confirmed that this
>> was the problem by shutting down the device for an hour.
>> Unfortunately, the couple's mother-in-law lives with them and insists
>> on using the baby monitor all day and night.
>> Chris
>> KB9SDX
>>?
>
> Chris,
> Make sure they know that the baby monitor is transmitting every word
> they say, (assuming it does). ?That will more than likely change their
> minds.
> --?
>
> 73's, and thanks,
> Dave (NK7Z)
> For software/hardware reviews see:
> http://www.nk7z.net
> --
>
> 73's, and thanks,
> Dave (NK7Z)
> For software/hardware reviews see:
> http://www.nk7z.net
>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 17 Jun 2016 12:14:25 +0000
> From: Dale Putnam <daleputnam at hotmail.com>
> To: Chris L <forzaferrari at gmail.com>, Elecraft
> <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3S "HI-RFI" warning a bit too sensitive?
> Message-ID:
> <CO2PR0601MB0950DF4848E55A3AC0041AC3D0570 at CO2PR0601MB0950.namprd06.prod.outlook.com>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I certainly hope they NEVER speak their credit card numbers.. their plans for the weekend, vacation, trips away from the house, bank accounts, security questions, or pretty much anything else. In today's world with so much concern about identity theft, credit card information... listening in, like they are providing, would provide enough information to very easily swipe an ID or two.. or three.. apply for credit cards, buy a car, or almost anything else. Wow... the possibilities are endless, and 99% are not good at all.
>
> Aside from the simple fact that it is a transmitter, and causes an issue.
>
> Good luck getting them to shut it off...
>
> IF it is a "security thing" for an elderly.. maybe the explanation of Life Line.. or some similar monitoring system would help... or the purchase of a pair of family service walky talkies, from the box stores, for less than 40 would work better.. that would certainly give the coverage, and only transmit when needed.
>
>
> Have a great day,
> --... ...-- Dale - WC7S in Wy
>
>
>
> ________________________________
> From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Chris L <forzaferrari at gmail.com>
> Sent: Friday, June 17, 2016 5:30 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3S "HI-RFI" warning a bit too sensitive?
>
> I believe the manual states that it takes a watt or two of power at the
> antenna connector to set off the HI-RFI warning. Imagine my surprise when I
> began seeing the warning on my brand new K3S just days after I'd assembled
> it. Almost everyone else who has seen this error has been using a K3 in a
> contest environment with multiple transmitters, so I was particularly
> stumped as there are no other transmitters in my shack (everything is
> boxed) and no active hams in my neighborhood. I did some testing and traced
> it to a signal coming in on my 6 meter antenna, which when I disconnected
> it caused the HI-RFI warning to go away. Using a VHF capable SDR in
> wideband mode, I found a strong FM signal on 49.850 and traced it to...
>
> A baby monitor. Yep, not one block from my house lives a couple with a
> cheap 49MHz baby monitor blasting away on 49.850MHz all hours of the day
> and night. A short "fox hunt" with a service monitor confirmed this. There
> is 100KHz worth of splatter coming from this thing and my old Icom 706
> shows it as S9 with the attenuator on (and S9 +60 without). I spoke with
> someone at the house and confirmed that this was the problem by shutting
> down the device for an hour. Unfortunately, the couple's mother-in-law
> lives with them and insists on using the baby monitor all day and night.
>
> I will continue to press for a diplomatic solution (possibly offering to
> buy them a newer 800/900MHz unit), but should I fail at that, is this
> something I should worry about as far as damaging my K3S? I find it hard to
> believe that a baby monitor is pumping out more than 1 watt, so I'm
> inclined to believe that the K3S is being a bit overprotective. This plus
> the fact that my 6 meter antenna is a PAR Omniangle which is
> omnidirectional and according to PAR has no appreciable gain. I'm tempted
> to program the K3S to ignore the HI-RFI warning for the time being.
> Thoughts?
>
> Chris
> KB9SDX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to daleputnam at hotmail.com
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 17 Jun 2016 13:37:45 +0000
> From: "Thorpe, Jeffrey" <jthorpe at liberty.edu>
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: [Elecraft] KX3 / KXPD3 "hanging"?
> Message-ID: <AC715346-5637-4BA1-8DA1-3B768BA2719D at liberty.edu>
> Content-Type: text/plain; charset="us-ascii"
>
> I've finally gotten back to working on my morse, practicing with my KX3 with the KXPD3 attached. At first I thought it was just me, as I am just relearning this after 30 years of non-use. (Straight-key back in high-school)
>
> I have the KX3 set for text decode, and speed set to 15wpm. Quite often, it seems to "hang" for a fraction of a second (variable time, but at times up to almost a full second). Usually it is with the right paddle (the dah). I can have the paddle pressed, but I don't get the dah right away - sometimes. Quite aggravating. I tried bumping the speed up as a test, with the same problem still occurring.
>
> I figure this could be a contact problem, but thought I'd ask first before doing any kind of disassembly, to see if there was some other known issue (maybe with firmware) first. I have the latest firmware installed. The KXPD3 is about one year old, and I have just now started using it.
>
> Jeff - KG7HDZ
>
> ------------------------------
>
> Message: 5
> Date: Fri, 17 Jun 2016 09:00:06 -0600
> From: Ken G Kopp <kengkopp at gmail.com>
> To: Chris L <forzaferrari at gmail.com>, elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3S "HI-RFI" warning a bit too sensitive?
> Message-ID:
> <CAD4CdTM-zB5QstahgBfPFRypNoi0eodYqoe8grQOLrF5wEjgwQ at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Perhaps a coax stub cut for the 49 MHZ frequency and "T'd" off the
> connector used by your 6M antenna could provide enough attenuation to
> alleviate the problem.
>
> 73
>
> K0PP
> I believe the manual states that it takes a watt or two of power at the
> antenna connector to set off the HI-RFI warning. Imagine my surprise when I
> began seeing the warning on my brand new K3S just days after I'd assembled
> it. Almost everyone else who has seen this error has been using a K3 in a
> contest environment with multiple transmitters, so I was particularly
> stumped as there are no other transmitters in my shack (everything is
> boxed) and no active hams in my neighborhood. I did some testing and traced
> it to a signal coming in on my 6 meter antenna, which when I disconnected
> it caused the HI-RFI warning to go away. Using a VHF capable SDR in
> wideband mode, I found a strong FM signal on 49.850 and traced it to...
>
> A baby monitor. Yep, not one block from my house lives a couple with a
> cheap 49MHz baby monitor blasting away on 49.850MHz all hours of the day
> and night. A short "fox hunt" with a service monitor confirmed this. There
> is 100KHz worth of splatter coming from this thing and my old Icom 706
> shows it as S9 with the attenuator on (and S9 +60 without). I spoke with
> someone at the house and confirmed that this was the problem by shutting
> down the device for an hour. Unfortunately, the couple's mother-in-law
> lives with them and insists on using the baby monitor all day and night.
>
> I will continue to press for a diplomatic solution (possibly offering to
> buy them a newer 800/900MHz unit), but should I fail at that, is this
> something I should worry about as far as damaging my K3S? I find it hard to
> believe that a baby monitor is pumping out more than 1 watt, so I'm
> inclined to believe that the K3S is being a bit overprotective. This plus
> the fact that my 6 meter antenna is a PAR Omniangle which is
> omnidirectional and according to PAR has no appreciable gain. I'm tempted
> to program the K3S to ignore the HI-RFI warning for the time being.
> Thoughts?
>
> Chris
> KB9SDX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kengkopp at gmail.com
>
>
> ------------------------------
>
> Message: 6
> Date: Fri, 17 Jun 2016 10:20:00 -0500
> From: David Box <dbox at eagle1llc.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KX3 / KXPD3 "hanging"?
> Message-ID: <8ee8eab8-ea92-5874-a03f-e95b766d824f at eagle1llc.com>
> Content-Type: text/plain; charset="windows-1252"
>
>
>
> ------------------------------
>
> Message: 7
> Date: Fri, 17 Jun 2016 11:23:31 -0400
> From: "Joe Subich, W4TV" <lists at subich.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3S "HI-RFI" warning a bit too sensitive?
> Message-ID: <220d9780-f098-90d6-68e4-0360c05b5427 at subich.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>
>> Using a VHF capable SDR in wideband mode, I found a strong FM signal
>> on 49.850 and traced it to...
>
> The SDR should be capable of providing a calibrated (dBm) signal
> strength. With that information and the distance from the target
> it should be relatively simple to calculate the ERP of the baby
> monitor.
>
> Given that you report the "HI-RFI" indicator is being activated on the
> K3S, I would suspect the baby monitor is producing an illegal ERP -
> whether it is out of spec accidentally (manufacturing) or has been
> tampered with by the owner is not an issue. I would generate a letter
> of complaint to the FCC (with calculated ERP data) indicating that you
> believe the baby monitor is not in compliance with regulations and must
> cease. Send a copy to the owners of the baby monitor a week before
> mailing the complaint to the Commission.
>
> 73,
>
> ... Joe, W4TV
>
>
>
>> I believe the manual states that it takes a watt or two of power at the
>> antenna connector to set off the HI-RFI warning. Imagine my surprise when I
>> began seeing the warning on my brand new K3S just days after I'd assembled
>> it. Almost everyone else who has seen this error has been using a K3 in a
>> contest environment with multiple transmitters, so I was particularly
>> stumped as there are no other transmitters in my shack (everything is
>> boxed) and no active hams in my neighborhood. I did some testing and traced
>> it to a signal coming in on my 6 meter antenna, which when I disconnected
>> it caused the HI-RFI warning to go away. Using a VHF capable SDR in
>> wideband mode, I found a strong FM signal on 49.850 and traced it to...
>>
>> A baby monitor. Yep, not one block from my house lives a couple with a
>> cheap 49MHz baby monitor blasting away on 49.850MHz all hours of the day
>> and night. A short "fox hunt" with a service monitor confirmed this. There
>> is 100KHz worth of splatter coming from this thing and my old Icom 706
>> shows it as S9 with the attenuator on (and S9 +60 without). I spoke with
>> someone at the house and confirmed that this was the problem by shutting
>> down the device for an hour. Unfortunately, the couple's mother-in-law
>> lives with them and insists on using the baby monitor all day and night.
>>
>> I will continue to press for a diplomatic solution (possibly offering to
>> buy them a newer 800/900MHz unit), but should I fail at that, is this
>> something I should worry about as far as damaging my K3S? I find it hard to
>> believe that a baby monitor is pumping out more than 1 watt, so I'm
>> inclined to believe that the K3S is being a bit overprotective. This plus
>> the fact that my 6 meter antenna is a PAR Omniangle which is
>> omnidirectional and according to PAR has no appreciable gain. I'm tempted
>> to program the K3S to ignore the HI-RFI warning for the time being.
>> Thoughts?
>>
>> Chris
>> KB9SDX
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ------------------------------
>
> Message: 8
> Date: Fri, 17 Jun 2016 11:27:52 -0400
> From: Michael Walker <va3mw at portcredit.net>
> To: "Elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3S "HI-RFI" warning a bit too sensitive?
> Message-ID:
> <CA+33ts45YfTRgVJ_JpgP+Bm4mVPQuCBQcO0xdH0-HxsGS0XCsQ at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> I had this problem once. Next time I showed up with a recording of
> everything they said over dinner and told them I recordered it over a block
> away.
>
> That got it fixed.
>
> In another case, with 49Mhz headphones, I just bought them a new 900mhz
> pair and gave it to them if they gave me their old ones. Sometimes it is
> just cheaper.
>
> Mike va3mw
>
> On Fri, Jun 17, 2016 at 11:23 AM, Joe Subich, W4TV <lists at subich.com> wrote:
>
>>
>> Using a VHF capable SDR in wideband mode, I found a strong FM signal
>>> on 49.850 and traced it to...
>>>
>>
>> The SDR should be capable of providing a calibrated (dBm) signal
>> strength. With that information and the distance from the target
>> it should be relatively simple to calculate the ERP of the baby
>> monitor.
>>
>> Given that you report the "HI-RFI" indicator is being activated on the
>> K3S, I would suspect the baby monitor is producing an illegal ERP -
>> whether it is out of spec accidentally (manufacturing) or has been
>> tampered with by the owner is not an issue. I would generate a letter
>> of complaint to the FCC (with calculated ERP data) indicating that you
>> believe the baby monitor is not in compliance with regulations and must
>> cease. Send a copy to the owners of the baby monitor a week before
>> mailing the complaint to the Commission.
>>
>> 73,
>>
>> ... Joe, W4TV
>>
>>
>>
>>
>> I believe the manual states that it takes a watt or two of power at the
>>> antenna connector to set off the HI-RFI warning. Imagine my surprise when
>>> I
>>> began seeing the warning on my brand new K3S just days after I'd assembled
>>> it. Almost everyone else who has seen this error has been using a K3 in a
>>> contest environment with multiple transmitters, so I was particularly
>>> stumped as there are no other transmitters in my shack (everything is
>>> boxed) and no active hams in my neighborhood. I did some testing and
>>> traced
>>> it to a signal coming in on my 6 meter antenna, which when I disconnected
>>> it caused the HI-RFI warning to go away. Using a VHF capable SDR in
>>> wideband mode, I found a strong FM signal on 49.850 and traced it to...
>>>
>>> A baby monitor. Yep, not one block from my house lives a couple with a
>>> cheap 49MHz baby monitor blasting away on 49.850MHz all hours of the day
>>> and night. A short "fox hunt" with a service monitor confirmed this. There
>>> is 100KHz worth of splatter coming from this thing and my old Icom 706
>>> shows it as S9 with the attenuator on (and S9 +60 without). I spoke with
>>> someone at the house and confirmed that this was the problem by shutting
>>> down the device for an hour. Unfortunately, the couple's mother-in-law
>>> lives with them and insists on using the baby monitor all day and night.
>>>
>>> I will continue to press for a diplomatic solution (possibly offering to
>>> buy them a newer 800/900MHz unit), but should I fail at that, is this
>>> something I should worry about as far as damaging my K3S? I find it hard
>>> to
>>> believe that a baby monitor is pumping out more than 1 watt, so I'm
>>> inclined to believe that the K3S is being a bit overprotective. This plus
>>> the fact that my 6 meter antenna is a PAR Omniangle which is
>>> omnidirectional and according to PAR has no appreciable gain. I'm tempted
>>> to program the K3S to ignore the HI-RFI warning for the time being.
>>> Thoughts?
>>>
>>> Chris
>>> KB9SDX
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to va3mw at portcredit.net
>>
>
>
> ------------------------------
>
> Message: 9
> Date: Fri, 17 Jun 2016 08:44:13 -0700
> From: Jim Brown <jim at audiosystemsgroup.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3S "HI-RFI" warning a bit too sensitive?
> Message-ID:
> <c94e22fd-c3d4-62a1-f661-ff2c387a2a1a at audiosystemsgroup.com>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> On Fri,6/17/2016 8:00 AM, Ken G Kopp wrote:
>> Perhaps a coax stub cut for the 49 MHZ frequency and "T'd" off the
>> connector used by your 6M antenna could provide enough attenuation to
>> alleviate the problem.
>
> Stubs are not nearly narrow enough to solve this problem. The unit in
> question is in clear violation of FCC Rules if it interferes with
> licensed communications, including yours. If it's putting out that much
> signal, it's clearly in excess of FCC Rules, probably wildly so.
>
> A year or two ago, I bought a low power FM TX on amazon that I hoped to
> use to feed an internet radio RX around my rural home and yard. I
> quickly rejected it -- it produced a ton of RF trash up and down the
> band and lots of audible distortion on its TX frequency. As I recall, it
> was advertised as 1W, and I had a 20 dB pad on the antenna. For at least
> five years, I've used a legal "trucker's" FM modulator that is in the
> 10mW range; my goal was to get about 6dB more field strength, and a
> cleaner signal.
>
> W4TV has given you good advice on the route through the FCC, but buying
> them a decent unit may be the more practical solution.
>
> 73, Jim K9YC
>
>
>
>
> ------------------------------
>
> Message: 10
> Date: Fri, 17 Jun 2016 18:05:19 +0200
> From: Helmut Berka <helmut.berka at t-online.de>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3S "HI-RFI" warning a bit too sensitive?
> Message-ID: <57641FBF.7020909 at t-online.de>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> Hi Chris,
>
> Did you tell her / them how dangerous high power RF is and how negative
> it affects a baby?
>
>
> vy 73 de
>
> Helmut DL2MAJ
>
>
>
> Am 17/06/16 um 13:30 schrieb Chris L:
>> I believe the manual states that it takes a watt or two of power at the
>> antenna connector to set off the HI-RFI warning. Imagine my surprise when I
>> began seeing the warning on my brand new K3S just days after I'd assembled
>> it. Almost everyone else who has seen this error has been using a K3 in a
>> contest environment with multiple transmitters, so I was particularly
>> stumped as there are no other transmitters in my shack (everything is
>> boxed) and no active hams in my neighborhood. I did some testing and traced
>> it to a signal coming in on my 6 meter antenna, which when I disconnected
>> it caused the HI-RFI warning to go away. Using a VHF capable SDR in
>> wideband mode, I found a strong FM signal on 49.850 and traced it to...
>>
>> A baby monitor. Yep, not one block from my house lives a couple with a
>> cheap 49MHz baby monitor blasting away on 49.850MHz all hours of the day
>> and night. A short "fox hunt" with a service monitor confirmed this. There
>> is 100KHz worth of splatter coming from this thing and my old Icom 706
>> shows it as S9 with the attenuator on (and S9 +60 without). I spoke with
>> someone at the house and confirmed that this was the problem by shutting
>> down the device for an hour. Unfortunately, the couple's mother-in-law
>> lives with them and insists on using the baby monitor all day and night.
>>
>> I will continue to press for a diplomatic solution (possibly offering to
>> buy them a newer 800/900MHz unit), but should I fail at that, is this
>> something I should worry about as far as damaging my K3S? I find it hard to
>> believe that a baby monitor is pumping out more than 1 watt, so I'm
>> inclined to believe that the K3S is being a bit overprotective. This plus
>> the fact that my 6 meter antenna is a PAR Omniangle which is
>> omnidirectional and according to PAR has no appreciable gain. I'm tempted
>> to program the K3S to ignore the HI-RFI warning for the time being.
>> Thoughts?
>>
>> Chris
>> KB9SDX
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to helmut.berka at t-online.de
>>
>
>
>
> ------------------------------
>
> Message: 11
> Date: Fri, 17 Jun 2016 16:05:20 +0000
> From: Alan Price <w1hyv at arrl.net>
> To: elecraft <elecraft at mailman.qth.net>
> Subject: [Elecraft] Let me build your K2
> Message-ID:
> <CO2PR01MB2102AACB6B7F97210FE33365EE570 at CO2PR01MB2102.prod.exchangelabs.com>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> You have a new K2 (or any other Elecraft kit) with the options you want. My prices are reasonable.
>
>
> 73
>
> Alan
>
> W1HYV
>
>
> ------------------------------
>
> Message: 12
> Date: Fri, 17 Jun 2016 09:09:52 -0700
> From: James Bennett <w6jhb at me.com>
> To: Elecraft Reflector Reflector <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX3 / FLDIGI Question
> Message-ID: <607032ED-0FF3-4B67-9A73-78AF86BFB46E at me.com>
> Content-Type: text/plain; charset=utf-8
>
> For those interested?..
>
> Got a suggestion from Ron, W7HD that the rig has to have VOX turned off. I had mine turned on. Turned it off and no longer have the TX hang problem. Yippee!!
>
>
>> On Wednesday, Jun 15, 2016, at Wednesday, 12:05 PM, James Bennett <w6jhb at me.com> wrote:
>>
>> Got a strange thing happening with my KX3 when I am running FLDIGI, and it just started happening in the past few days. FLDIGI is version 3.22.01.
>>
>> If I place FLDIGI into transmit mode the KX3 follows and whatever I type is transmitted - cool. However, when I tell FLDIGI to stop transmitting and go back to receive, FLDIGI quits sending audio as it has been instructed and ?appears? to go back to receive mode, but the KX3 TX light stays on and I have to press the XMIT button to make it go receive. Not cool.
>>
>> Furthermore, if I am using WSJT-X, T/R works fine.
>>
>> Running the KX3 in CW mode works fine - I press and release the key, the rig transmits and then goes back to receive. This obviously has something to do with FLDIGI. But I?m starting here with the Elecraft group in hopes someone has a suggestion.
>>
>> Any idea what I need to change to make the KX3 obey the FLDIGI command to return to receive mode?
>>
>> Thanks, Jim / W6JHB
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w6jhb at me.com
>
>
>
> ------------------------------
>
> Message: 13
> Date: Fri, 17 Jun 2016 13:14:27 -0300
> From: Jorge Diez - CX6VM <cx6vm.jorge at gmail.com>
> To: James Bennett <w6jhb at me.com>
> Cc: Elecraft Reflector Reflector <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX3 / FLDIGI Question
> Message-ID:
> <CA+h_a7JSURX+NJyUSTbmgCjiES03637G81TfROMNZ=ZYoTqE7g at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> wait for coming version of SWISSLOG software http://www.informatix.li/ ,
> will have important support for FLDIGI, MultiPsk, Cw Skimmer and OmniRig
>
> 73,
> Jorge
> CX6VM/CW5W
>
>
>
> 2016-06-17 13:09 GMT-03:00 James Bennett <w6jhb at me.com>:
>
>> For those interested?..
>>
>> Got a suggestion from Ron, W7HD that the rig has to have VOX turned off. I
>> had mine turned on. Turned it off and no longer have the TX hang problem.
>> Yippee!!
>>
>>
>> > On Wednesday, Jun 15, 2016, at Wednesday, 12:05 PM, James Bennett <
>> w6jhb at me.com> wrote:
>> >
>> > Got a strange thing happening with my KX3 when I am running FLDIGI, and
>> it just started happening in the past few days. FLDIGI is version 3.22.01.
>> >
>> > If I place FLDIGI into transmit mode the KX3 follows and whatever I type
>> is transmitted - cool. However, when I tell FLDIGI to stop transmitting and
>> go back to receive, FLDIGI quits sending audio as it has been instructed
>> and ?appears? to go back to receive mode, but the KX3 TX light stays on and
>> I have to press the XMIT button to make it go receive. Not cool.
>> >
>> > Furthermore, if I am using WSJT-X, T/R works fine.
>> >
>> > Running the KX3 in CW mode works fine - I press and release the key, the
>> rig transmits and then goes back to receive. This obviously has something
>> to do with FLDIGI. But I?m starting here with the Elecraft group in hopes
>> someone has a suggestion.
>> >
>> > Any idea what I need to change to make the KX3 obey the FLDIGI command
>> to return to receive mode?
>> >
>> > Thanks, Jim / W6JHB
>> > ______________________________________________________________
>> > Elecraft mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Elecraft at mailman.qth.net
>> >
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list: http://www.qsl.net/donate.html
>> > Message delivered to w6jhb at me.com
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to cx6vm.jorge at gmail.com
>
>
>
>
> --
> 73,
> Jorge
> CX6VM/CW5W
>
>
> ------------------------------
>
> Message: 14
> Date: Fri, 17 Jun 2016 17:04:42 +0000 (UTC)
> From: thomas branton <kf5wbs at yahoo.com>
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>, Thomas
> Branton <tombrantoncpa at gmail.com>
> Subject: [Elecraft] K3/100 for sale
> Message-ID:
> <1438065673.5072018.1466183082472.JavaMail.yahoo at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> I have my? K3/100 (serial number 61--) with KAT3; KXV3A; KBPF3; KFLA-400; KFLA-1.8; KFLA-2.8; KFLA-6; and KSYN3A for sale. It has been my backup rig and has seen little use. It has all the updates and has the new KSYN3A board installed. It is in mint shape and never seen cigarette smoke. I want $2300.00 plus shipping continental USA from 75964. E-mail me
> if interested. Thanks,?Tom KF5WBS?
>
>
> ------------------------------
>
> Message: 15
> Date: Fri, 17 Jun 2016 10:22:58 -0700
> From: "Eric Swartz - WA6HHQ, Elecraft" <eric at elecraft.com>
> To: Elecraft Reflector Reflector <Elecraft at mailman.qth.net>
> Subject: [Elecraft] KX2 Shipping Status
> Message-ID: <02f9ed5d-ceb8-ba39-05ca-344022ca92ae at elecraft.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Current KX2 shipping Status:
> Ordered through 5/27: Ships 6/17-6/21
> Ordered 5/28-29: Ships 6/21-6/22
> Ordered 5/30-6/1: Ships 6/22-6/23
> Ordered 6/2-6/3: Ships 6/23-24
> Ordered 6/4-6/5: Ships 6/24-27
>
> For the latest KX2 shipping status, the best place to go is our shipping status
> page at:
> http://www.elecraft.com/elecraft_shipping_status.htm
>
> Please note that due to the overwhelming success of the KX2, we are receiving a
> huge number of emails and calls each day. If possible, please resist the urge to
> email for status and read our status page. That will help us focus on processing
> new orders for shipment quickly :-)
>
> For fastest response to shipping issues, please email sales at elecraft.com
> directly, or call us at 831-763-4211 (add +1 in Eu). For tech support use
> support at elecraft.com (k3support at ..., kx3support at ... and support at ... all go to
> the support at elecraft.com mailbox, which is read by all of our support engineers.)
>
> On emails we may be delayed a business day in replying. (We also have a large
> email load on Mondays from the accumulated weekend emails.) Also remember that
> we are time shifted a day from Eu.
>
> 73,
> Eric
> /elecraft.com/
>
>
>
> ------------------------------
>
> Message: 16
> Date: Fri, 17 Jun 2016 13:36:36 -0400
> From: Peter Pauly <ppauly at gmail.com>
> To: "Eric Swartz - WA6HHQ, Elecraft" <eric at elecraft.com>
> Cc: Elecraft Reflector Reflector <Elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX2 Shipping Status
> Message-ID:
> <CAKXfWbTUg4_t-zCS3TOKFL8H01o5erv8YO6QEbO91MSPNP-wCw at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> I ordered a KXPA100 amp four days ago and the status was in stock. It
> hasn't shipped yet and I'm hoping to get it before Field Day, but I am
> assuming that the popularity of the KX2 is indirectly affecting all of the
> product lines. If I lived in CA, I would offer to come over and help.
>
> On Fri, Jun 17, 2016 at 1:22 PM, Eric Swartz - WA6HHQ, Elecraft <
> eric at elecraft.com> wrote:
>
>> Current KX2 shipping Status:
>> Ordered through 5/27: Ships 6/17-6/21
>> Ordered 5/28-29: Ships 6/21-6/22
>> Ordered 5/30-6/1: Ships 6/22-6/23
>> Ordered 6/2-6/3: Ships 6/23-24
>> Ordered 6/4-6/5: Ships 6/24-27
>>
>> For the latest KX2 shipping status, the best place to go is our shipping
>> status page at:
>> http://www.elecraft.com/elecraft_shipping_status.htm
>>
>> Please note that due to the overwhelming success of the KX2, we are
>> receiving a huge number of emails and calls each day. If possible, please
>> resist the urge to email for status and read our status page. That will
>> help us focus on processing new orders for shipment quickly :-)
>>
>> For fastest response to shipping issues, please email sales at elecraft.com
>> directly, or call us at 831-763-4211 (add +1 in Eu). For tech support
>> use support at elecraft.com (k3support at ..., kx3support at ... and support at ...
>> all go to the support at elecraft.com mailbox, which is read by all of our
>> support engineers.)
>>
>> On emails we may be delayed a business day in replying. (We also have a
>> large email load on Mondays from the accumulated weekend emails.) Also
>> remember that we are time shifted a day from Eu.
>>
>> 73,
>> Eric
>> /elecraft.com/
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ppauly at gmail.com
>>
>
>
> ------------------------------
>
> Message: 17
> Date: Fri, 17 Jun 2016 10:58:02 -0700
> From: Wayne Burdick <n6kr at elecraft.com>
> To: Tom Crayner <tcrayner at gmail.com>
> Cc: david perry <bumbledp at gmail.com>, elecraft
> <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX2 real life power
> Message-ID: <DCC18B45-2C8E-4A95-AB9F-1E3FB6673F1A at elecraft.com>
> Content-Type: text/plain; charset=us-ascii
>
> The KX2 will put out a full 10 watts on most bands when running from 11-14 V. In real life :)
>
> The internal battery, when fully charged, starts out at 12 V but quickly settles to around 11 V.
>
> 73,
> Wayne
> N6KR
>
>
> On Jun 17, 2016, at 4:37 AM, Tom Crayner <tcrayner at gmail.com> wrote:
>
>> Sounds like the batteries are possibly suspect.
>>
>> A KX3 will give out 10W down to 10V according to the firmware release
>> (v2.38), and although I haven't personally run my batteries down that low I
>> haven't seen any behavior to indicate otherwise (in other words I'm getting
>> 10W out, not 3 or 4W as you are seeing). Check and see if you are on that
>> FW release.
>>
>> On the KX2 I am set at 5W out (not the full 10W due to duty cycle of the
>> digital I use) and I am still getting the full 5W out with the battery pack
>> about half depleted (if I believe the amp hours reading).
>>
>> Tom, W2YF
>>
>> On Fri, Jun 17, 2016 at 4:45 AM, david perry <bumbledp at gmail.com> wrote:
>>
>>> Im wondering what KX2 users are finding to be the output power when on
>>> internal battery. I ask because I am using a friends KX3 at the moment and
>>> whilst on external power it gives full spec, on internals the power drops
>>> to 3 or 4 watts out. Is the KX2 better than this or is that all there is,
>>> even on the new rig?
>>>
>>> David
>>> G4YVM
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to tcrayner at gmail.com
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n6kr at elecraft.com
>
>
>
> ------------------------------
>
> Message: 18
> Date: Fri, 17 Jun 2016 11:09:48 -0700
> From: "Ron D'Eau Claire" <ron at cobi.biz>
> To: "'Dennis L. Haarsager'" <haarsager at gmail.com>,
> "'Elecraft at mailman.qth.net'" <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KXPD3 thumb screw
> Message-ID: <002f01d1c8c3$700ad0f0$502072d0$@biz>
> Content-Type: text/plain; charset="us-ascii"
>
> Doing some testing with only the KXPD3 paddles available, I just left the
> longer screw out. One screw holds the paddles securely in place.
>
> 73, Ron AC7AC
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dennis
> L. Haarsager
> Sent: Thursday, June 16, 2016 6:19 PM
> To: Elecraft at mailman.qth.net
> Subject: [Elecraft] KXPD3 thumb screw
>
> Got my KX2 today, SN 314. Pretty sweet! But, unfortunately, the KXPD2 is
> back ordered. I already have a KXPD3 with the older "pointy" thumb screw.
> Has anyone had luck just grinding the point down?
>
> 73, Dennis, N7DH/1
>
> --
> Mail: PO Box 192, Kittery Point, ME 03905-0192
> +1 207-703-2472 (home)
> +1 202-431-1556 (mobile)
> +1 866-587-3403 (fax)
> <http://technology360.com> <http://haarsager.org> <http://stadsbygd.info>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to ron at elecraft.com
>
>
>
> ------------------------------
>
> Message: 19
> Date: Fri, 17 Jun 2016 11:11:45 -0700
> From: Walter Underwood <wunder at wunderwood.org>
> To: Peter Pauly <ppauly at gmail.com>, Elecraft Reflector Reflector
> <Elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX2 Shipping Status
> Message-ID: <56277F11-8C14-4FBC-A725-769FFE8B8718 at wunderwood.org>
> Content-Type: text/plain; charset=us-ascii
>
> I ordered a KXPA100 kit on 6/2 and it was shipped on 6/8. That was after the KX2 announcement.
>
> I would expect that a fair number of people are ordering a KXPA100 with their KX2.
>
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
>
>> On Jun 17, 2016, at 10:36 AM, Peter Pauly <ppauly at gmail.com> wrote:
>>
>> I ordered a KXPA100 amp four days ago and the status was in stock. It
>> hasn't shipped yet and I'm hoping to get it before Field Day, but I am
>> assuming that the popularity of the KX2 is indirectly affecting all of the
>> product lines. If I lived in CA, I would offer to come over and help.
>>
>> On Fri, Jun 17, 2016 at 1:22 PM, Eric Swartz - WA6HHQ, Elecraft <
>> eric at elecraft.com> wrote:
>>
>>> Current KX2 shipping Status:
>>> Ordered through 5/27: Ships 6/17-6/21
>>> Ordered 5/28-29: Ships 6/21-6/22
>>> Ordered 5/30-6/1: Ships 6/22-6/23
>>> Ordered 6/2-6/3: Ships 6/23-24
>>> Ordered 6/4-6/5: Ships 6/24-27
>>>
>>> For the latest KX2 shipping status, the best place to go is our shipping
>>> status page at:
>>> http://www.elecraft.com/elecraft_shipping_status.htm
>>>
>>> Please note that due to the overwhelming success of the KX2, we are
>>> receiving a huge number of emails and calls each day. If possible, please
>>> resist the urge to email for status and read our status page. That will
>>> help us focus on processing new orders for shipment quickly :-)
>>>
>>> For fastest response to shipping issues, please email sales at elecraft.com
>>> directly, or call us at 831-763-4211 (add +1 in Eu). For tech support
>>> use support at elecraft.com (k3support at ..., kx3support at ... and support at ...
>>> all go to the support at elecraft.com mailbox, which is read by all of our
>>> support engineers.)
>>>
>>> On emails we may be delayed a business day in replying. (We also have a
>>> large email load on Mondays from the accumulated weekend emails.) Also
>>> remember that we are time shifted a day from Eu.
>>>
>>> 73,
>>> Eric
>>> /elecraft.com/
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to ppauly at gmail.com
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wunder at wunderwood.org
>
>
>
> ------------------------------
>
> Message: 20
> Date: Fri, 17 Jun 2016 13:37:04 -0500
> From: Randy Farmer <w8fn at tx.rr.com>
> To: elecraft <elecraft at mailman.qth.net>
> Subject: [Elecraft] K-Pod modification for K3S
> Message-ID: <08ef8df2-b132-7c72-8411-d3e05316fc68 at tx.rr.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> As it happens, I will soon have my K3s under the knife to replace a
> faulty PA module. It occurred to me that this would also be a good
> opportunity to perform the internal modification to power the K-Pod via
> the data cable. The web page says information on the modification "will
> be posted here before product ship", but so far I haven't seen it. Has
> anyone seen this information, and if so, could you please post a link to it?
>
> 73...
> Randy, W8FN
>
>
> ------------------------------
>
> Message: 21
> Date: Fri, 17 Jun 2016 19:25:53 +0000
> From: "Thorpe, Jeffrey" <jthorpe at liberty.edu>
> To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX3 / KXPD3 "hanging"?
> Message-ID: <CAF1EF0C-AFFE-4003-BB28-39D3EF28AC5B at liberty.edu>
> Content-Type: text/plain; charset="us-ascii"
>
> Got a few responses. Turns out it was the grounding problem. Did the mod with some thin speaker wire and works well now.
>
> Jeff - KG7HDZ
>
>> On Jun 17, 2016, at 6:39 AM, Thorpe, Jeffrey <jthorpe at liberty.edu> wrote:
>>
>> I've finally gotten back to working on my morse, practicing with my KX3 with the KXPD3 attached. At first I thought it was just me, as I am just relearning this after 30 years of non-use. (Straight-key back in high-school)
>>
>> I have the KX3 set for text decode, and speed set to 15wpm. Quite often, it seems to "hang" for a fraction of a second (variable time, but at times up to almost a full second). Usually it is with the right paddle (the dah). I can have the paddle pressed, but I don't get the dah right away - sometimes. Quite aggravating. I tried bumping the speed up as a test, with the same problem still occurring.
>>
>> I figure this could be a contact problem, but thought I'd ask first before doing any kind of disassembly, to see if there was some other known issue (maybe with firmware) first. I have the latest firmware installed. The KXPD3 is about one year old, and I have just now started using it.
>>
>> Jeff - KG7HDZ
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jthorpe at liberty.edu
>
>
> ------------------------------
>
> Message: 22
> Date: Sat, 18 Jun 2016 00:10:03 +0000
> From: "Mike VE3YF" <mike at ve3yf.com>
> To: "" <elecraft at mailman.qth.net>
> Subject: [Elecraft] P3/TX Mon Coupler Switching Idea
> Message-ID: <eb629c82-390d-409e-9018-17453cc1c2c2 at getmailbird.com>
> Content-Type: text/plain; charset="utf-8"
>
> I am thinking of getting a 2nd DCHF Coupler for my P3 TX Monitor Setup. This way I could Monitor 2 Outputs from the same P3. Currently I have a coupler right after my main linear via Ant 1 on the K3, but want to add a second coupler to the output of the KPA500 via Ant 2 on the K3. I then could switch between the outputs and use the same P3. I realize I can only use 1 coupler at a time, but changing cables etc out all the time would be a pain. Does anyone know of a switch that could handle this job. I have done a search on the internet and eBay and found nothing that would mate up to a RJ8 Connector which the TX Monitor and Couplers use. If any one is doing what I am contemplating I would like to hear from you. Tnx.
>
> 73 De Mike
> VE3YF
>
> http://www.ve3yf.com
> [http://www.ve3yf.com/]
>
> ------------------------------
>
> Message: 23
> Date: Fri, 17 Jun 2016 20:30:00 -0700
> From: Alan Bloom <n1al at sonic.net>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] P3/TX Mon Coupler Switching Idea
> Message-ID: <5764C038.9000601 at sonic.net>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> > I am thinking of getting a 2nd DCHF Coupler for my P3 TX Monitor
> > Setup. This way I could Monitor 2 Outputs from the same P3. ...
> > Does anyone know of a switch that could handle this job.
>
> Here's the one I use. It allows switching up to four 8P8C (RJ-45)
> connectors. $10 from Amazon:
>
> https://smile.amazon.com/gp/product/B00AUB3SSA/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
>
> Alan N1AL
>
>
>
> ------------------------------
>
> Message: 24
> Date: Sat, 18 Jun 2016 01:18:54 -0700
> From: "Erik Basilier" <ebasilier at cox.net>
> To: <Elecraft at mailman.qth.net>
> Subject: [Elecraft] KX3 S-meter segment stuck
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi All,
>
>
>
> Today I have the S-5 segment stuck on my KX3 display. That is also the SWR 2
> segment. What I mean is the segment is black with no receive signal, while
> the segments to the left of it are not black, and there is no transmission
> going on. Reloading the firmware didn't help. Any ideas?
>
>
>
> Thanks,
>
> Erik K7TV
>
>
>
> ------------------------------
>
> Message: 25
> Date: Sat, 18 Jun 2016 10:47:01 +0200
> From: Erlend Grimseid <egrimseid at gmail.com>
> To: Erik Basilier <ebasilier at cox.net>
> Cc: Elecraft List <Elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX3 S-meter segment stuck
> Message-ID:
> <CABOvax_9bqSkdYPNZMjvX8gZf9oSHbe1jXBz5hN=c=0N4ZVJZA at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Might it be the RF gain setting?
>
> 73
> LA4TTA
> Erlend
>
> 2016-06-18 10:18 GMT+02:00 Erik Basilier <ebasilier at cox.net>:
>
>> Hi All,
>>
>>
>>
>> Today I have the S-5 segment stuck on my KX3 display. That is also the SWR
>> 2
>> segment. What I mean is the segment is black with no receive signal, while
>> the segments to the left of it are not black, and there is no transmission
>> going on. Reloading the firmware didn't help. Any ideas?
>>
>>
>>
>> Thanks,
>>
>> Erik K7TV
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to egrimseid at gmail.com
>>
>
>
> ------------------------------
>
> Message: 26
> Date: Sat, 18 Jun 2016 09:36:02 +0000
> From: "Mike VE3YF" <mike at ve3yf.com>
> To: "" <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] P3/TX Mon Coupler Switching Idea
> Message-ID: <d5828bfb-c981-421c-83f9-d13c5cc125cb at getmailbird.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi Alan:
>
> Tnx for the info, good to see someone else has done it. Question though, does the Coupler cable use RJ45 connectors, reason I ask I see on the Elecraft site it says RJ8, and I am not finding too much info on the Internet ref RJ8 Connectors. Perhaps I am reading too much into it.
>
>
>
> 73 De Mike
> VE3YF
>
> http://www.ve3yf.com
> [http://www.ve3yf.com/]
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/elecraft
> You must be a subscriber to post.
> Elecraft web page: http://www.elecraft.com
>
> ------------------------------
>
> End of Elecraft Digest, Vol 146, Issue 24
> *****************************************
More information about the Elecraft
mailing list