[Elecraft] KXPD3 thumb screw

[Ken Talbott]

Bench grinder, gloves, and grind away - with caution!  Lose your grip and
lose your screw!
Ken - ke4rg

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Matt
Zilmer
Sent: Thursday, June 16, 2016 9:38 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] KXPD3 thumb screw

Hi Dennis,

This will work, but you're better off ordering the replacement thumbscrew
(E700245).  The machining on this thumbscrew replacement meets our specs for
the KXPD3 when used with the KX3 and KX2 transceivers.

73!

Matt Zilmer

KX2 Project Manager


On 6/16/2016 6:19 PM, Dennis L. Haarsager wrote:
> Got my KX2 today, SN 314.  Pretty sweet!  But, unfortunately, the 
> KXPD2 is back ordered.  I already have a KXPD3 with the older "pointy"
thumb screw.
> Has anyone had luck just grinding the point down?
>
> 73, Dennis, N7DH/1
>

--
Always store beer in a dark place.  - R. Heinlein

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to ktalbott at gamewood.net