[Elecraft] My K3, P3 and Expert Linear

[Alan Bloom]

The Y splitter should go on the RS-232 input to the P3, not the K3. That 
is, it should connect to the "PC" connector on the P3.

Alan N1AL


On 06/13/2016 08:55 AM, William Levy wrote:
> Gentlemen,
>
> My K3 powers on the P3 and the Expert 1.3.
> Out the back of my K3 the 15 pin and 9 pin go to the Expert, the 9 pin
> Serial is split and goes to the P3.
>
> When the P3 is OFF the K3 and Expert talk beautifully together. When the P3
> is on the band data gets lost on the way to the Expert and the P3 works
> fine.
>
> So my question is how do I get the Serial Data on the 9 pin K3 to talk
> correctly to both Expert and P3?
> At the moment the Y splitter is not doing the job.
>
> Perhaps there is a trick I don't know or a box I need to add to the station.
>
> Thoughts?
>
> Sincerely,
>
> Bill N2WL
> Meeker CO