[Elecraft] XLR Audio Cable to K3S

[David Ahrendts]

Am I correct here:
I’m building an audio cable for the K3S — 3-pin XLR from the mich to the 8-pin K3S input (pin diagram on page 13 of the Owner’s manual). And here’s a Wiki on the XLR pins:  https://en.wikipedia.org/wiki/XLR_connector
XLR pin #1 (ground) to K3S 8-pin #7 and #8, both ground. The connector shell should be grounded also for best RF protection, yes?
XLR pin #2 to K3S 8-pin #1, mich audio

David A., KK6DA, Los Angeles



David Ahrendts   davidahrendts at me.com