[Elecraft] K3 Operating Tip: Using TX TEST to adjust speech controls and ALC level

[Don Wilhelm]

Bret,

You have to adjust the MON setting to hear your audio through your 
headphones.
Is MON set to zero?  Hold the CMP/PWR knob to get to the MON setting.

73,
Don W3FPR

On 7/31/2016 11:45 AM, MaverickNH wrote:
> I'm trying this on my K3s, which appears to have the same capability.
>
> I have Heil ProSet K2/K3 headphones installed and configured as instructed
> (1/8" plug to gray AD-1-K adapter jack and 1/4" plug to K3s PHONES jack,
> with adapter plugged to K3s MIC, and menu MIC SEL set to FP.L bI AS on.
>
> With MIC Gain set to 23, I see red TX LED light continuously as I speak, in
> normal TX mode. With TX TEST selected, the red LED does not slowly blink,
> and I can see the ALC meter register 5-6 bars, but hear nothing through my
> headphones.
>
> No doubt I am missing a setting, eh? I appreciate the help!
>
>