[Elecraft] k-pod PTT emulation

[pbsbarry]

Thanks Ron, I was pretty sure that was the case but then, there are some
pretty clever fellas out there.  I've programmed SWT16 on f12 and it's
just fine.  The vox  in  the k3 is so good that I usually operate with 
that.

Thanks for taking the time to answer, Ron.

73, steve AE2

On 07/29/2016 1:40 pm, Ron D'Eau Claire wrote:
> Since the macro is sent ONLY when switch is pressed, it's not possible 
> to
> send a "return to receive" macro by releasing a switch on the K-Pod.
> 
> SWT16;
> Will toggle the XMIT switch between transmit and receive.
> 
> 73 Ron AC7AC
> 
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
> pbsbarry
> Sent: Thursday, July 28, 2016 11:37 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] k-pod PTT emulation
> 
> Have any of you clever Elecrafters figured out a macro to emulate a 
> true PTT
> function (push ptt on, release, off) for the k-pod function switches?
> 
> Any ideas?
> 
> Steve, AE2G
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 
> Message
> delivered to ron at cobi.biz